Used VAC AERO VAH 1220 HV-2 #9094652 for sale
URL successfully copied!
Tap to zoom
ID: 9094652
Vintage: 1998
Vacuum diffusion furnace
Hydrogen Partial Pressure Equipped: Other atmospheres also acceptable, N or Ar
Vacuum System
Roughing Pump: Edwards E2M80
Diffusion Pump: Varian, VHS6
Holding Pump: Varian, DS102
Gas Quench System
Blower: VAC-AERO, 10 HP Turbine, 600 cfm, 2 bar
Heat X: CS 600
Hot Zone:
Operating Temperature: 1000°F - 2400°F
Max. Clean-up Temperature: 2450°F, 10 Minutes Max
Uniformity: As per ASM 2750C
Maximum Weight: 60 lbs at 2400°F
Power Supply: 35 KVA Hunterdon V.R.T.
High purity graphite felt insulation
Graphoil hot face
Molybdenum heating elements
Controls:
Programmer: Honyewell DCP-551
O.T. Safety: Honeywell UDC 3300, Type S T/C
Vacuum Gauge: Edwards Model AGC
Low Vacuum and Partial Pressure use convectron T/C gauges
High Vacuum uses Active Inverted Magnetron (Cold Cathode ionization)
Datalogger: Honeywell DPR-250
Type S and K T/C and vacuum gauges mentioned above
Channels
1-9 – Type K Load T/Cs
13 – Type S Controller T/C
14 – Type S Overtemperature T/C
15 – Tank Vacuum Gauge #1
16 – Tank Vacuum Gauge #2
17 - Type K Roughing Pump Oil
18 – Type K Diffusion Pump Oil
19 – Type K Water Inlet
20 – Type K Heat Exchanger Outlet
21-24 – Type K Load T/Cs in DEV
Physical Parameters
Furnace Control Cabinet: 30” Width x 30” Length x 84” Height
Vacuum System: 126” Length x 75” Width x 95” Height
Transformers (2): 25” Width x 25” Length x 25” Height
Cooling system not included
460 V, 3 PH, 60 Hz
1998 vintage.
VAC AERO VAH 1220 HV-2 is a diffusion furnace and accessories equipment designed and built for modern industrial applications. This system is capable of performing a variety of processes, including Rapid Thermal Processing, Rapid Alloying, Vacuum Furnace Probing, Vacuum Heat Treatment, Vacuum Brazing, and Vacuum Forming. VAH 1220 HV-2 is equipped with a furnace chamber that is designed to meet the requirements of high-temperature processing of industrial products. The furnace chamber is constructed from high-grade insulated steel and includes an oxidation-resistant coating. It is designed to ensure efficient heat transfer to the product, which helps to increase process times and reduce energy consumption. In addition to the furnace itself, VAC AERO VAH 1220 HV-2 unit includes a variety of accessories to help facilitate the processing of materials. This includes a computer-controlled digital thermocouple controller, which allows for precise control of the process temperature. A vacuum controller is also included, which enables the user to accurately monitor and adjust the pressure inside the furnace. A versatile power supply and heater machine is included as well, which supports a wide range of power sources from gas, electric, and even solar. The process chamber of VAH 1220 HV-2 is also equipped with an advanced filtration tool. This filtration asset traps and contains dangerous particles and fumes, ensuring that users are not exposed to any hazardous gases during the process. An exhaust fan is also installed in the chamber, which further contributes to the cleanliness and safe operation of the model. VAC AERO VAH 1220 HV-2 also includes a set of control parameters, which can be easily adjusted and set according to the specific requirements of each process. These parameters allow operators to customize the temperature, pressure, and atmosphere of the process chamber, leading to higher quality product results. Overall, VAH 1220 HV-2 is a highly efficient and reliable diffusion furnace and accessory equipment. It is designed to provide precise control of the process environment and ensure safe operation, while providing process times and energy savings. Users can also easily customize the system to meet their exact needs, which helps to achieve the highest levels of efficiency and productivity.
There are no reviews yet