Used SPI G3 #9246736 for sale
URL successfully copied!
ID: 9246736
Fiber laser systems
P/N: SP-20P-SM-A-A-G-B, SP-20P-0801-003
(3) Mirror stages
With 7x beam expander PT-P00398
Chiller manifold / Heat sink
TDK / LAMBDA SWS300-24
Peak power: 7 kW
Output power: Up to 20 W
Gaussian beam profile
High speed marking compatible: 2000 cps
Bitmap marking compatible
Pulse width variable: 25 Pre-set waveforms
Maximized peak power
High reliability / repeatability / stability design
Analogue power control input
Pulse gate
Pulse trigger
Applications:
Marking
Plastics
Metals
Poly-compounds
Silicon scribing
Ablation silicon processing
Solar cell processing
ITO Removal
Thin film cutter
Fine foil driller
Peak powers exceeding: 7 kW
Hardware interface (PC-Free operation)
Pulsed and CW mode
Pulse characteristics selectable pulse waveforms
Pulse rate: 1-500 kHz
Integrated controller
Fast rise-time
Temperature correction
Operating temperature range: 55°C Base plate (45°C Ambient)
G3 SM Series 12-20 W Fiber lasers
With GTWave and pulse tune technology
Output power stability: ≤ 5 %
Output beam characteristics:
Beam diameter: 0.8-7.2 mm (Nominal) with selected BET M² ≤ 1.3
Polarization state: Random
Beam delivery cable length: 2 m
Electrical laser head
Cooling: ≤0.1°C/W
Environmental ambient temperature range: 0°C - +45°C
Humidity: 5-95 % RH
Accessories beam expanders: 2.6x, 4x, 5x, 7x, 9x
Power supply
Pulsed laser cooling kit
Power and communications cables
Does not include accessories
CWM Minimum specifications: 12W / 6kW, 20W / 7kW
Minimum pulse energy: PRF0 0.4 mJ 0.5 mJ
Pulse repetition range:
Full power range: 30-500 kHz, 40-500 kHz
Reduced power range: 1-30 kHz, 1-40 kHz
Modulation range CW: Up to 100 kHz
Power supply:
24 V / 7 A
24 V / 10 A.
SPI G3 is a powerful laser device which is specifically designed for industrial applications. It leverages an RF Excite Source, enabling it to produce high-accuracy, high-quality laser pulses with an impressive pulse energy over a wide range of pulse lengths. This RF Excite Source is made up of a specialized radio frequency in-line amplifier, matched, high-speed driver electronics, and an active RF power delivery equipment. The active RF power delivery system features a removable RF carrier input, a removable resonate feedback line, and termination resistors to ensure maximum stability and reliable performance over long distances. This delivery unit increases the power output of the laser, allowing it to produce up to 2kW of power and optimize output pulse energy over a wide range of pulse widths. G3 is a CW laser, which means that the pulses are continuous throughout the operation. This makes the device ideal for applications which require precision accuracy and high-quality laser fabrication over long distances. It also offers adjustable pulse energy through the front panel, allowing the user to precisely adjust output for specific operation requirements. SPI G3 features a waveguide machine which helps to facilitate delivery of laser energy along with the RF excite source. This helps to ensure fast and accurate delivery of pulses to the desired area, with minimal pulse distortion. The waveguide tool also provides excellent thermal management, helping to protect the laser from overheating and ensuring long-term performance and reliability. G3 uses a unique active cooling asset, ensuring that the laser device is always operating at cool temperatures and preventing the device from experiencing overheating and shut down. This ensures that the laser device can provide the highest performance and reliability levels over long periods of service. Overall, SPI G3 is an impressive laser device that provides users with a powerful laser output and reliable performance. Its RF excite source and waveguide model provide fast, accurate delivery of pulses over long distances, while its active cooling equipment helps to ensure long-term performance and reliability.
There are no reviews yet