Used SPEEDLINE / CAMALOT 3800 #9159943 for sale

It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.

ID: 9159943
Vintage: 1995
Dispenser Auto vision alignment Automatic Z-height sensors Automatic needle calibration station With CAMALOT pumps Point-to-point movement Input / Output zones Quick changeover time Systems dispense: (25000) dots of solder paste Advanced motion control: Independent acceleration and deceleration Dispensing head Dispense area for 3800: 14" x 14" (356mm x 356mm) Mechanical specification: 3800 System: Max Z travel: 2.0" (50.8mm) Resolution: 0.0005" (12.5 microns) Max X, Y axis speed: 16 in./sec (406mm/sec) Acoustic noise: 68 DBA Drive system: High speed precision ball screw drives DC Servo motors with closed loop motion control in X, Y and Z Conveyor specification: Belt conveyor with manual or auto Adjustable width with input and output buffers Complies with SMEMA standards Conveyor clearance: 1.56" (1" top / 0.56" bottom) (25mm top / 14mm bottom) 3800 System: Conveyor lift: 14" x 14" (355.6mm x 355.6mm) With vacuum support pins Dispensing: Dot placement accuracy: ±0.003" @ 3 sigma (75 microns) Dispensing method: Positive displacement pump and / or time pressure Typical applications: Surface mount adhesive Solder paste Solder mask Conductive adhesive Dispensing rate: 25,000 Dots/hr Center: 0.125" (3mm) Diameter dot: 0.020" (0.5mm) Computer: Windows Computer: IBM Compatible PC Program method: Teach mode with trackball, download from CAD Facility requirements: Power requirements: 115 Volts, 60 Hz, 1 Phase, 10 Amps International: 220 Volts, 50 Hz, 1 Phase, 10 Amps Pneumatic requirements: Min 80 PSI, 1CFM, 10 Micron filtered air Environmental conditions temperature: 66°F (19°C) to 90°F (32°C) Humidity: 30-70% MTBF: 2000 Hours MTTR: 30 Minutes typical 1995 vintage.
SPEEDLINE / CAMALOT 3800 is a high speed, multi-functional 'pc board assembly and manufacturing' equipment that combines pick-and-place technology with a flexible production platform. This system is designed to deliver maximum quality and efficiency to production lines while providing the highest degree of flexibility and performance. CAMALOT 3800 consists of several components, including an 8-channel pick-and-place head, a vacuum spray unit, and de-pinning machine. The 8-channel pick-and-place head has a simple two-axis machine that can place components up to 40mm in height and a maximum rotation of 360 degrees. The vacuum spray tool provides an even layer of glue to the components, ensuring that the components are held securely in place while the production line is running. The de-pinning machine removes excess pins quickly and easily to increase the flow of components. SPEEDLINE 3800 is designed to be an intuitive, user-friendly asset that can be operated by both skilled and unskilled personnel. It also has an advanced computerized touchscreen interface that allows users to quickly configure and customize production settings. Additionally, the software can be upgraded with new components and production line settings, allowing for maximum continuity and reliability. 3800 is designed with enhanced safety and quality control features. Safety sensor technology can be installed to detect any potential problems with components or wiring. Additionally, the model is built with the highest quality materials to ensure that the components are not damaged during the production process. Finally, SPEEDLINE / CAMALOT 3800 provides quick turnaround times. The time from when components are loaded to when they are assembled and ready for shipment is reduced drastically with CAMALOT 3800. The equipment can quickly add new components to a production line, significantly reducing the time required for setup and making the system ideal for high-volume production lines. Overall, SPEEDLINE 3800 is a high-performance 'pc board assembly and manufacturing' unit that is designed to deliver maximum efficiency, flexibility, and reliability. It is an intuitive, user-friendly machine with a variety of safety and quality control features, and a quick turnaround time that makes it perfect for high-volume production lines.
There are no reviews yet