Used VITRONICS SOLTEC 6622 CC #9183843 for sale
It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.
Tap to zoom
Sold
ID: 9183843
Vintage: 2006
In-line automatic wave soldering machine
Through-hole
SMT Components
Setup for lead solder
OS: Windows 7
(3) Preheat zones:
Zone 1 & 2: Forced convection
Zone 3: Calrod (IR)
Lead-free compatible solderpot
Single-head nozzle spray fluxer
PCB Width: 460mm
Automatic solder addition for (2) solder bars
Mix of V- and L-shaped heavy-duty fingers
Motorized conveyor width adjustment
Standard color: Grey white panels
Installation conditions:
Ambient temperature: 10°C-35°C
Relative humidity: 30%-70%
Atmospheric pressure: 960-1030 mbar
Power connection:
Voltage: 400 VAC ± 10%
Frequency: 50/60 Hz ± 1%
Required power: 48 kVA Max
Air pressure:
Vapour saturation: 15°C
Maximum amt of oil: 0 mg/m³
Air pressure: 6 bar-10 bar
Classification class: ISO 8573.1
Process gas:
Medium: Nitrogen
Pressure: 6-8 bar
Required quantity: 15 m3/h
Quality: > 99,999 vol %
Exhaust volume:
Required total: 1600 m3/h at 400 Pa
Exhaust requirements:
With spray fluxer: 1000 m3/hr (589 CFM) at 800 Pa
With foam fluxer: 250 m3/hr (147 CFM) at 150 Pa
600 m3/hr (353 CFM) at 250 Pa
Includes:
Frames
Digital motor control
Weekly timer
Light tower (Green, orange, red, and audible alarm)
Board tracking system for automatic parameter
Subsystem activation
Conveyor with titanium fingers
Heavy duty fingers, 2mm thick fingers
Motorized conveyor width adjustment via PC-menu
Compressed air control with electrical & pneumatical connectors
Flux supply system with level monitoring on PC screen
Single head nozzle spray fluxer
Nozzle fluid cap FC7
Solderpot:
Motorized solderpot height adjustment
Integrated frame for motorized solderpot roll out
Solder level measurement
Valve for solder drainage incl. drain pipe
Adjustable chromium backplate
Separate dross compartment
Oxide bins
Automatic overheat switch off
Dross minimizer
Sealings at the pump shaft to eliminate oxide powder production
Chromium finished pump impellers
Titanium bolts around wave area
Chromium finished wave formers
Ocean case for delta wave
Power supply: 400V, 3 Ph, 60Hz
2006 vintage.
VITRONICS SOLTEC 6622 CC is a state-of-the-art printed circuit board (PCB) solder machine designed to quickly and accurately produce reliable solder joints for a variety of electronic assembly applications. Utilizing advanced laser vision detection, the machine can accurately adjust the conditions of the process according to the part's shape to produce consistent results. VITRONICS SOLTEC 6622CC is equipped with a powerful soldering head that is capable of accurately soldering small surface mount components and through-hole devices with the same head. This head is powered by up to 10,000 W of IR energy, providing precise temperature control with minimal heat damage. The high power output also enables SOLTEC 6622CC to cover large boards quickly to produce multiple assemblies in parallel. The machine is also equipped with an advanced control equipment that can store up to 200 jobs, allowing for quick setup and easy recall of parameters. This control system also enables the machine to monitor each job step-by-step, ensuring maximum quality and product yield is achieved. An in-line visual inspection unit is also available to validate all solder joints prior to board unloader. 6622 CC is designed to be integrated with existing production lines to quickly produce consistent solder joints while also increasing quality and productivity. The machine's modular design enables it to process boards with different sizes, numbers of components, layers and lead-bind methods, which further increases its versatility. VITRONICS SOLTEC SOLTEC 6622CC is designed with an intuitive user interface to enable easier operator use and reduce the possibility of operator errors. Additionally, the machine comes with a variety of process safety features such as an Anti-Static Grounding Machine and an Emergency Stop Button for improved safety. It meets the IPC-J-STD-001 and the IPC-A-610D standards to ensure the highest level of quality in the assembly process. Overall, 6622CC is a reliable, efficient and flexible PCB solder machine that can quickly and accurately produce solder joints for a variety of electronic assembly applications. It is designed to integrate with existing production lines and offers advanced features such as laser vision detection and a flexible control tool for improved quality and productivity.
There are no reviews yet