Used ADVANTEST R8340A #9352440 for sale

ADVANTEST R8340A is an electronic test equipment designed to provide accurate testing of a wide range of devices, from integrated circuits to printed circuit boards. R8340A offers comprehensive features including digital multi-meter functionality, high-bandwidth active probes, digital I/O, waveform analysis, parametric measurement, and high-frequency / high-speed pulse measuring capability. Analog testing is supported using two 5.5 digit Internal Digital Multimeters (IDM), allowing measurement of Voltage, Current, Resistance and Capacitance. Voltage measurements range up to 1000V (DC + AC), with an accuracy of 0.015% + 1.5 digits and current measurements up to 10A with an accuracy of 0.03% + 1.5 digits. Digital testing is provided by the Advanced Digital Trigger Module (ADTM). It supports triggering from TTL Glitch, ECL/PECL glitch, JTAG & SPI, as well as verification of EPROM codes. The ADTM can also record digital waveforms with eight state patterns and is capable of capturing and displaying various I/O sources. Test fixtures can be connected to ADVANTEST R8340A using an active high bandwidth differential probe, which is user configurable. R8340A also features an 18-bit ISA bus, which allows for a greater degree of flexibility when it comes to signal routing. ADVANTEST R8340A has waveform sampling rate of 10MHz and a frequency response of DC to 10 MHz, allowing waveforms to be captured at peak, crest and negative peak points. A built-in logic analyzer can also be used to measure and analyze low-speed digital logic signals. The instrument supports parametric measurements including High-Frequency Pulse Measurements (HFPM), Time Domain Reflectometry (TDR) and Impedance / Return Loss Measurement (IRM). One of the key features of R8340A is its high degree of automation. It allows for rapid device testing via automatic probing processes which reduce total test time. The ADTM can also be used to monitor voltage and current waveforms in real time. Finally, the instrument is capable of storing test results and waveforms on its internal hard drive. In summary, ADVANTEST R8340A is a high performance electronic test equipment with a suite of comprehensive features. It is capable of performing accurate and fast measurements of multiple parameters with a high degree of automation and integration. It is suitable for testing a wide variety of devices, from integrated circuits to printed circuit boards, and can be used to both diagnose and debug any test or device processes.