loading

1072 RESULTS FOUND FOR: used Lasers

1 2 3 4 5 6 Next
  • -: M210-HD-V10

    - M210-HD-V10 Laser M210-PS-V10 Test power supply Q-Switch RF RS232 Parameter setting: (14) DT Number of hours on: 50,871 Number of UV hours: 6,810 (29.448MJ) Mode reading: Number of hours on: 50,871 Number of UV hours: 6,810 Peak power: 0.88 E_p / T_p (Guassian) PRF (KHz) / Power(W)@ 22 A / Pulse width (ns) / Peak power (kW) 3 / 2.21 / 20.8 / 31.2 5 / 2.47 / 28 / 15.5 10 / 1.28 / 39 / 2.9 1.76 Watt @ 21 Amp, 3 KHz (Internal trigger) Maximum power 5.27 Watt @ 29 Amp, 5 KHz (Internal trigger) THG: 180 Max current: 29.35 A GENTEC TPM-300 Power meter Power (Watts) @ 3 KHz, 5 KHz, 10 KHz Current (A) / 3 KHz / 5 KHz / 10 KHz 15 / 0.01 / 0.03 / 0.02 16 / 0.02 / 0.05 / 0.03 17 / 0.06 / 0.12 / 0.08 18 / 0.36 / 0.36 / 0.22 19 / 0.76 / 0.76 / 0.58 20 / 1.30 / 1.28 / 1.28 21 / 1.76 / 1.98 / 1.60 22 / 2.21 / 2.47 / 1.28 23 / 2.56 / 2.81 / 2.00 24 / 2.84 / 3.15 / 2.40 25 / 3.18 / 3.51 / 2.90 26 / 3.53 / 3.85 / 3.24 27 / 4.00 / 4.20 / 3.60 28 / 4.49 / 4.65 / 4.07 29 / 4.87 / 5.27 / 4.60 1.97 Watt @ 21 Amp, 3 KHz (Internal trigger) Maximum power 6.11 Watt @ 29 Amp, 5KHz (Internal trigger) THG: 190 Max current: 29.35A GENTEC TPM-300 Power meter Power (Watts) @ 3 KHz, 5 KHz, 10 KHz Current (A) / 3 KHz / 5 KHz / 10 KHz 15 / 0.00 / 0.02 / 0.00 16 / 0.02 / 0.06 / 0.01 17 / 0.11 / 0.20 / 0.07 18 / 0.31 / 0.50 / 0.18 19 / 1.57 / 1.01 / 0.46 20 / 1.64 / 1.60 / 0.88 21 / 1.97 / 2.21 / 1.67 22 / 2.28 / 2.57 / 2.15 23 / 2.57 / 2.90 / 2.49 24 / 2.82 / 3.23 / 2.77 25 / 3.10 / 3.58 / 3.04 26 / 3.45 / 4.05 / 3.35 27 / 3.93 / 4.62 / 3.70 28 / 4.49 / 5.36 / 4.12 29 / 5.19 / 6.11 / 4.56 2002 vintage.
  • AB LASER: STARMARK

    AB LASER Starmark Laser marking system, 100 W XY motion system Approx 10" XY travel, 8" Z travel Z axis is motorized with push button control 9" Mark field LaserCad 2.29 Red diode pointing laser for mark alignment Focus finder 220-240V, 3 phase 2001 vintage.
  • AB LASER: STARMARK

    AB LASER Starmark Laser marking system YAG laser wavelength: 1064 nm 3 AC 220 V, 60 Hz, 30 A Max power: 60 W 1997 vintage.
  • ADVANCED LASER SEPARATION INTERNATIONAL: DCM 802

    ADVANCED LASER SEPARATION INTERNATIONAL DCM 802 Laser scriber.
  • AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT: 5505A

    HEWLETT-PACKARD / AGILENT 5505A Laser display for HEWLETT-PACKARD / AGILENT 5526A laser system.
  • AMS: 3510

    AMS 3510 DPSS Laser systems Power supply with cable & chiller Hoses Wavelength: 365 nm Power: 1,5 W Pulse repetition rate: 50 kHz Pulse-pulse stability: ±3% Hour meter reading: 0 hrs 2014 vintage.
  • APPLIED MATERIALS / BACCINI :

    APPLIED MATERIALS / BACCINI Laser saws Designed for Squaring Round Monocrystalline wafers for solar cell manufacturing Hours used: 20 Throughput 1200 wafers/hr/saw Mechanical Yield 99.9% Wafer Size Capability 150mm Round to 125mm Pseudo-square 200mm Round to 155mm Pseudo-square 300mm Round to 208mm Pseudo-square 165mm Square to 156.5mm Square Cut Tolerance ±0.25mm Cut Squareness 0.5mm Cut Alignment Center Notch Wafer Thickness 400 to 1000 Microns Wafer Scribe Depth ≥ 1/3 of Wafer Thickness Edge Quality No chips greater than 0.5mm Off-Axis Programmable from 0° to 20° 2006 vintage.
  • BACCINI / AMAT / APPLIED MATERIALS:

    BACCINI / APPLIED MATERIALS Laser saws for advanced wafer etching and processing Rated throughput: 1,200 wafers/hour 2006 vintage.
  • BEAMSCOPE: P5

    BEAMSCOPE P5 Scanning slit beam analyzer Measurable sources: Continuous wave Wavelength range: 190 nm to 1150 nm Silicon detector Measured beam power: 2 mW to 0.5 W Diameter (1/2): 25 mm Gaussian beam: 355 nm Slit: 2.5 mm Optical dynamic range: 55 dB Measured beam diameters: 0.5 mm to 25 mm Measurement resolution: 0.05 mm / .1% Measurement accuracy: +-1%+-1 mm Absolute accuracy Measured beam profiles: X & Y Linear Logarithmic profile display modes Displayed profiles: X Only Y Only X & Y 2-D Plot 3-D Plot ISO 11146 Standard Measured profile parameters: Gaussain beam diameter Gaussian fit Second moment beam diameter Knife-edge beam diameter Centroid position Relative / Absolute Major axis: Ellipticity / Orientation 2002 vintage.
  • BEAMSCOPE: P5

    BEAMSCOPE P5 Scanning slit beam analyzer Measurable sources: Continuous wave Wavelength range: 190 nm to 1150 nm Silicon detector Measured beam power: 2 mW to 0.5 W Diameter (1/2): 25 mm Gaussian beam: 355 nm Slit: 2.5 mm Optical dynamic range: 55 dB Measured beam diameters: 0.5 mm to 25 mm Measurement resolution: 0.05 mm / .1% Measurement accuracy: +-1%+-1 mm Absolute accuracy Measured beam profiles: X & Y Linear Logarithmic profile display modes Displayed profiles: X Only Y Only X & Y 2-D Plot 3-D Plot ISO 11146 Standard Measured profile parameters: Gaussain beam diameter Gaussian fit Second moment beam diameter Knife-edge beam diameter Centroid position Relative / Absolute Major axis: Ellipticity / Orientation 2002 vintage.
  • BEHRENS: CB3000

    BEHRENS CB3000 Laser cutting system Currently dismantled Parts from another CB3000 (1994 vintage): Rofin TR25 CO2-laser with 2500 W power Water chiller IBH control Motors and servo controllers No documentation 1995 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Specifications: Engraving area: 24” x 36” Work area: 24” x 38” + 5 Pass through Auto focus Beam combiner Z-axis: Motorized (Adjustable, 12”) Air assist Power: 150 Watts Motor type: Nema stepper Features: Red dot positioning Auto focus Air assist Honey comb table Flash drive operation Pass-through mode Equipped with: Chiller CW-5000 Exhaust fan and venting Rotary chuck Power requirements: 110 Volts, 1 Phase 2014 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Specifications: Engraving area: 24” x 36” Work area: 24” x 38” + 5 Pass through Auto focus Beam combiner Z-axis: Motorized (Adjustable, 12”) Air assist Power: 150 Watts Motor type: Nema stepper Features: Red dot positioning Auto focus Air assist Honey comb table Flash drive operation Pass-through mode Equipped with: Chiller CW-5000 Exhaust fan and venting Rotary chuck Power requirements: 110 Volts, 1 Phase 2014 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Specifications: Engraving area: 24” x 36” Work area: 24” x 38” + 5 Pass through Auto focus Beam combiner Z-axis: Motorized (Adjustable, 12”) Air assist Power: 150 Watts Motor type: Nema stepper Features: Red dot positioning Auto focus Air assist Honey comb table Flash drive operation Pass-through mode Equipped with: Chiller CW-5000 Exhaust fan and venting Rotary chuck Power requirements: 110 Volts, 1 Phase 2014 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Specifications: Engraving area: 24” x 36” Work area: 24” x 38” + 5 Pass through Auto focus Beam combiner Z-axis: Motorized (Adjustable, 12”) Air assist Power: 150 Watts Motor type: Nema stepper Features: Red dot positioning Auto focus Air assist Honey comb table Flash drive operation Pass-through mode Equipped with: Chiller CW-5000 Exhaust fan and venting Rotary chuck Power requirements: 110 Volts, 1 Phase 2014 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Size: 24" X 36" 2014 vintage.
  • BOSS: HP-2436

    BOSS HP-2436 Engraving laser system Specifications: Engraving area: 24” x 36” Work area: 24” x 38” + 5 Pass through Auto focus Beam combiner Z-axis: Motorized (Adjustable, 12”) Air assist Power: 150 Watts Motor type: Nema stepper Features: Red dot positioning Auto focus Air assist Honey comb table Flash drive operation Pass-through mode Equipped with: Chiller CW-5000 Exhaust fan and venting Rotary chuck Power requirements: 110 Volts, 1 Phase 2014 vintage.
  • CHICAGO: CLS 960

    CHICAGO CLS 960 Laser trimming system Step and repeat capability Moving component (forcer) Operator I/F card, Galvo card, I-Card and V-Card CPU: PC-189 Number of matrix boards: (3) boards with cables Computer / OS: industrial PC with XP Step and repeat system: NORTHERN MAGNETICS platen and BALDOR forcer Boards in the step and repeat power supply: PC362, PC363, PC364 and (4) PC360 GPIB 220V Choice of laser power supply: Wet laser, LEE 712TQ laser lamp pumped 1064nm yag laser, power supply LPS30B SPECTRA PHYSICS diode pumped yag laser, power supply T20 1995 vintage.
  • CHICAGO: CLS-33

    CHICAGO CLS-33 Laser system DAYMARC Manual slide table CRYSTAL TECHNOLOGIES 5100-10 Q-Switch CONTROL LASER 512QT Q switch controller ZILOG 05-6002-11 Microcomputer Z-80 Boards: Computer board PC132B AUTO-CUT PC107-B OP CNTL PC103 V CARD PC117C I CARD PC116-D MATRIX PC-111B MATRIX PC-111C MATRIX PC-111C MATRIX PC-111C MATRIX PC-111C MATRIX PC-111C.
  • CHICAGO: CLS-33

    CHICAGO CLS-33 Laser system XYNETICS-ELECTROGLAS Step and repeat table XYNETICS-ELECTROGLAS 110-1 Table power supply CRYSTAL TECHNOLOGIES 226800000011 Q-Switch CONTROL LASER 512QT Q switch controller Boards: Computer board PC132A AUTO-CUT PC107-B OP CNTL PC103 V CARD PC117E I CARD PC116-D MATRIX PC-111C MATRIX PC-111C BOARD PC-137 XY GALVO DRIVE PC-112C XYNETICS-ELECTROGLAS Model 110-1 S&R table.
Show per page
1 2 3 4 5 6 Next