Reflow Ovens

ABW SYSTEMS / MANIX TSC-1008 Reflow ovens 3 Phase, 240 VAC Currently installed.

MANIX MANUFACTURING TSC-1008 Reflow oven Voltage: 208 - 240 3 phase Mesh belt 1998 vintage.

MANIX MANUFACTURING TSC-1008 Reflow oven Voltage: 208 - 240 3 phase Mesh belt 1998 vintage.

ABW SYSTEMS / MANIX TSC-1008 Reflow ovens 3 Phase, 240 VAC Currently installed.

Description: ADVANCED TECHNIQUES / ATCO: PRO 1600 Forced convection reflow oven 120/208 VAC, 50A, 50 Hz, 3 phase 2008 vintage.

ADVANCED TECHNIQUES / ATCO PRO 1600 Forced convection reflow oven 120/208 VAC, 50A, 50 Hz, 3 phase 2008 vintage.

ADVANTEST Pro 1600-EXN Reflow oven Temperature: Up to 375° Celsius Reflow area: 20" x 20"/ 508mm x 508mm Topside clearance: 4"/101mm Programmable heating zones: 10 Heating type: Full forced air or nitrogen convection Interior: Stainless steel Air requirements: 80- 100 PSI@0.3 CFM Power requirements: 120/208 VAC 3 Phase 50 Amp 50/60 Hz Peak power consumption: 16 kW (during ramp up stages of a profile) Operating consumption: 9 kW (during reflow) Full convection: Yes Lead free compatible: Yes (10) Heating zones: Yes (2) Cooling zones: Yes Footprint of 31" x 31": Yes Computer control: Yes Software package: Yes Library with (50) profiles: Yes Exhaust / fume cleaning: Yes Nitorgen reflow capable: Yes Notebook PC: Yes.

APS - Benchtop reflow oven (3) Zones.

APS NOVASTAR GF 120 HC / HT Reflow oven.

BTU Pyramax 150 Lead-free reflow oven 24" wide board capacity Wire mesh and edge rail 2005 vintage.

BTU Pyramax 125A Reflow oven (10) Zone top / bottom heat (2) Cooling zones Edge rail Mesh conveyor Left to right 208 V 2010 vintage.

BTU Pyramax 150 Reflow oven (10) Zones 2006 vintage.

BTU Pyramax 98N Reflow soldering machine Maximum temperature rating: 350 °C Nominal operating temperature: 80 - 325°C Number of controlled heated zones: (7) Top / Bottom Heater: BTU Porcupine ii Heater zone 5kw: Zone 1,2,6,7 Heater zone 2.7kw: Zone 3,4,5 Total heated length: 2489 mm Blower accuracy: (5) Degree celcius Total cooling length: 711 mm Oven atmosphere: Air / N2 Gas distribution system: Point 1: Entrance curtain top / bottom Point 2: Zone 1 top/bottom Point 3: Zone 4 and 5 top / bottom Point 4: Zone 6 and 7 top / bottom Point 5: Cooling zone Point 6: Exit curtain top / bottom N2 Feeding zone: Entrance, 1,4&5,6&7, cooling, exit O2 Ppm measurement (zone): 1,7 2006 vintage.

BTU Paragon 150 Reflow oven.

BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB Tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Right to left PCB Width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2012 vintage.

BTU Pyramax 98 Reflow oven Set up for nitrogen 2007 vintage.

BTU Pyramax 100A Air reflow oven Zones: (8) Heating zones (1) Cooling zone Conveyor type: Chain + Mesh Flow direction: Left to right Front rail fixing 2010 vintage.

BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB Tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Left to right PCB Width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2016 vintage.

BTU Pyramax 150Nz12 Reflow oven (1) Rail / Belt combination with 4.8mm chain pin (1) Mesh belt conveyor (1) Power supply unit (1) High accuracy temp control system (1) Flux control with flux evacuation system (1) Over temp control unit (1) Flux management system (1) Exhaust set (1) Hot air reflow system (1) 12 Couple up-down independent heating zones (2) Cooling zones Operating interface: Windows 7 Controller: Lenovo PC (1) Corresponding lead-free solder paste (1) UPS (1) PCB tempt deviation 2 (1) Accuracy of temperature controller PCB Loading: Left to right PCB width range: 50-4400 mm Mesh height: 900±20 mm Warm up time: About 220 min Conveyor speed: 250-1500 mm / min Smart tracker: SMEMA Light tower (Ready / Not ready) Coupled with KIC 24 / 7 Kit Currently installed 2015 vintage.

BTU Pyramax 150 Reflow oven (10) Heating zones (2) Cooling zones Mash conveyor Chiller unit.