loading

2146 results for found: used Solar Production Equipment

1 2 3 4 5 6 Next
  • -: -

    RENA Lot Lot of equipment: Make Model Description Vintage RENA PreWaClean Wafer pre-washing system - RENA WaSEP Wafer separation machine - RENA InWaClean Wafer washing machine 2009.
  • -: -

    - - Manufactured New: Solar Module Laminator (Oil heating) Outline Size: 2470mm x 1870mm x 1200mm Equipment Weight: 3T Power supply: 380 V, 3 phase Power Max.: 40 kW, Working: 15 kW Vacuum Pump Speed: 30L/S Maximum vacuum: 10Pa Laminated Size: 1400mm x 2200mm Control mode: Touch-screen Control Highest working temperature: 180°C Temperature uniformity: ±1.5°C Compressed air pressure: 0.5-0.8 MPa Compressed air flux: 2000L/min Better temperature uniformity: ±1.5°C, it fulfills a solidification craft demand absolutely Adjustable laminated pressure: 0.02 MPa - 0.1 MPa Heating mode: Adopt heat conduction oil. Temperature is adjusted automatically by PID intelligence system that controls accurate Performance: It can operate 24 hours continuously in high temperature, which is applicable in industry and laboratory Proof-drape design of: Rubber, the design can lengthen available service life of rubber, improve laminating smoothness Flexible control: Including automated mode and manual mode, flexible control mode integrates with the techniques of vacuum, atmospheric pressure, PID temperature control, programmable control and relay output, which realizes various complicated control technology Structure characteristic: It pulls towards the back, which is convenient to module up and down. The plat of laminator is higher than the frame. Silica gel seal places on, which is lengthened the service life. It adopts patent techniques of laminated platform and integration of under-vacuum chamber, which contribute to smoothness and non-deformation Emergency openings system: It continues to laminate modules as emergency occurs (eg. power cut). Operator opens the upper cover and takes out modules by manual mode Alarm system: When oil temperature of laminator exceeds the alarm limit, the system shut off the power supply of heating automatically Ensure security-lock of upper cover: The upper cover can lock arbitrarily position and doesn’t fall down when it works in usual. The upper cover locks any position automated when power cut urgently, so it can ensure operators safe Emergency pushbutton: Operator may deal quickly and shut off total power supply as emergency Operation monitoring: It monitor the running parameters anytime by the operate interface (include degree of vacuum, temperature, pressure of air supply, running state and so on). Applying Range: The laminator is applied to laminate and solidify. It is applied to laminating solar module of single-crystal silicon and multi-crystal silicon.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • ABB: IRB6600/M2004

    ABB IRB6600/M2004 Back-end solar panel robot.
  • AIRCO / BOC: G-45

    AIRCO / BOC G-45 Inline glass / solar coating system Capacity: 1 million square feet of coated glass per year Panel Size: up to 25" x 75" x .75" PLC System Control: three minute load to load time System includes all cables, water and vacuum manifolds Entry & Exit Load Tables Entry & Exit Load Lock Chambers Nine (9) cathode positions with three (3) cathodes installed Chrome Targets Airco 30 KW & 60 KW DC Power Supplies Gas Mass Flow Controllers (MFC's) LEYBOLD Residual Gas Analizer (RGA) Installed Includes: Manifolds Pumps Cable trays Wiring De-installed and currently in storage 1990 vintage.
  • AIRCO / BOC: G-45

    AIRCO / BOC G-45 Inline glass / solar coating system Capacity: 1 million square feet of coated glass per year Panel Size: up to 25" x 75" x .75" PLC System Control: three minute load to load time System includes all cables, water and vacuum manifolds Entry & Exit Load Tables Entry & Exit Load Lock Chambers Nine (9) cathode positions with three (3) cathodes installed Chrome Targets Airco 30 KW & 60 KW DC Power Supplies Gas Mass Flow Controllers (MFC's) LEYBOLD Residual Gas Analizer (RGA) Installed Includes: Manifolds Pumps Cable trays Wiring De-installed and currently in storage 1990 vintage.
  • ALPHA OMEGA POWER TECH: GEN 2

    ALPHA OMEGA POWER TECH Gen 2 ALPHA OMEGA POWER TECH Gen 2 Pulsed solar simulator.
  • ALPHA OMEGA POWER TECH: GEN 2

    ALPHA OMEGA POWER TECH Gen 2 Pulsed solar simulator.
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED ATON 1600 Sputter systems, 2007 vintage.
  • AMAT / APPLIED MATERIALS: DOUBLE PRINTING SOFT LINE

    APPLIED MATERIALS Double Printing Soft Line Includes: Line loader (4) Print modules (3) Buffers (3) Drying ovens Firing oven loader Tester Firing oven unloader Tester Sorter Line loader in-line: Wafer holder, stack Printer module (#1), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#1) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-idle Printer module (#2), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#2) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-enabled Printer module (#3), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini: Safety pre-centering device Drying oven module (#3): Buffer Optical centering device Buffer for wafers 50 pcs Rotator device Printer module (#4), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini (linear): Safety pre-centering device Furnace loader (2) Furnace unloader double stack magazines: Unloader option Flip Tester: AOI - print quality, (2) cameras, Icos (matrix) Integration for Pasan Sorter manual Accessories: (2) Add. flood bars (125mm) (2) Add. print squeegees (125mm) (2) Add. flood bars (156mm) (2) Add. print squeegees (156mm) (2) Add. screen frame adapters (12") (8) Stack magazines (125mm) (8) Stack magazines (156mm) Standard spare kit (non consumable parts) Standard spare kit printing testing line (consumable parts).
  • AMAT / APPLIED MATERIALS: DOUBLE PRINTING SOFT LINE

    APPLIED MATERIALS Double Printing Soft Line Includes: Line loader (4) Print modules (3) Buffers (3) Drying ovens Firing oven loader Tester Firing oven unloader Tester Sorter Line loader in-line: Wafer holder, stack Printer module (#1), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#1) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-idle Printer module (#2), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#2) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-enabled Printer module (#3), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini: Safety pre-centering device Drying oven module (#3): Buffer Optical centering device Buffer for wafers 50 pcs Rotator device Printer module (#4), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini (linear): Safety pre-centering device Furnace loader (2) Furnace unloader double stack magazines: Unloader option Flip Tester: AOI - print quality, (2) cameras, Icos (matrix) Integration for Pasan Sorter manual Accessories: (2) Add. flood bars (125mm) (2) Add. print squeegees (125mm) (2) Add. flood bars (156mm) (2) Add. print squeegees (156mm) (2) Add. screen frame adapters (12") (8) Stack magazines (125mm) (8) Stack magazines (156mm) Standard spare kit (non consumable parts) Standard spare kit printing testing line (consumable parts).
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED ATON 1600 SiN PVD Sputter system (10) chambers 2007 vintage.
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED: ATON 1600 Sputter system (10) chambers 2007 vintage.
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED MATERIALS ATON 1600 SiN PVD Sputter systems (10) Chambers Currently de-installed 2007 vintage.
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED: ATON 1600 SiN PVD Sputter system, 2008 vintage.
  • AMAT / APPLIED MATERIALS: DOUBLE PRINTING SOFT LINE

    APPLIED MATERIALS Double Printing Soft Line Includes: Line loader (4) Print modules (3) Buffers (3) Drying ovens Firing oven loader Tester Firing oven unloader Tester Sorter Line loader in-line: Wafer holder, stack Printer module (#1), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#1) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-idle Printer module (#2), back: Safety pre-centering device Camera 40u Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Drying oven module (#2) Buffer: Optical centering device Buffer for wafers 50 pcs Flip installed-enabled Printer module (#3), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini: Safety pre-centering device Drying oven module (#3): Buffer Optical centering device Buffer for wafers 50 pcs Rotator device Printer module (#4), front: Safety pre-centering device (3) Cameras with APPVS high resolution Squeegee Snap off device Automatic screen calibration Automatic paste dispenser Print inspection module Baccini (linear): Safety pre-centering device Furnace loader (2) Furnace unloader double stack magazines: Unloader option Flip Tester: AOI - print quality, (2) cameras, Icos (matrix) Integration for Pasan Sorter manual Accessories: (2) Add. flood bars (125mm) (2) Add. print squeegees (125mm) (2) Add. flood bars (156mm) (2) Add. print squeegees (156mm) (2) Add. screen frame adapters (12") (8) Stack magazines (125mm) (8) Stack magazines (156mm) Standard spare kit (non consumable parts) Standard spare kit printing testing line (consumable parts).
  • AMAT / APPLIED MATERIALS: ATON 1600

    APPLIED ATON 1600 SiN PVD Sputter system (10) chambers 2007 vintage.
Show per page
1 2 3 4 5 6 Next