Used K&S Maxum Plus #293600158 for sale
URL successfully copied!
Tap to zoom
ID: 293600158
Vintage: 2017
Wire bonders
Standard loop
BGA2 Loop
BGA2 Worked loop
Fine pitch: 35 µm in-line at 3σ
Bond accuracy: ± 2.5 µm at 3σ
X-Axis: 56 mm
Y-Axis: 66 mm
Magazine: Slot pitch: 1.27 mm - 25 mm
Premium options:
BGA3 Low loop bump
Security bond: RF Loop
J-Wire Loop: CSP
BCA4 Loop: SSB
Spider loop: BCA5
CSP Long loop: 12000 Wires
Looping capability:
Maximum wire length: 7.6 mm
Minimum loop height: 100 µm
Productivity:
Wire cycle time: 63 m/sec (Standard loop)
Conversion times:
Same lead frame: < 4 min
Different lead frame: < 5 min
Material Handling System (MHS):
Flat boat
Tape BCA
Manual
Man-machine interface:
Monitor: 15" LCD Display
Control panel: Alphanumeric keypad
With function keys and dedicated buttons
8000 Series bond programs
Graphical User Interface (GUI )
Minimum air pressure: 65 PSI
Nominal air consumption (Flow rate): 3.5 CFM at 65 PSI
Nominal power consumption:1.2 kVA
Input power supply: 100-240 VAC, -15% - 10%, Single phase, 50/60 Hz (±3 Hz)
2017 vintage.
K&S Maxum Plus is a bonder designed for use in adhesive bonding, over-molding and encapsulation applications. It uses a proprietary technology to provide a strong bond between two materials, such as plastic, metal, rubber and glass. Maxum Plus utilizes a patented hydrostatic method of bonding which applies low pressure and thin layers of material to create a hermetic seal. This unique approach enables precision control over adhesion, with a tight tolerance control of applied deposits. K&S Maxum Plus offers a range of benefits compared to traditional bonding technologies. First, there is the capability to bond various types of materials, even those which may not be conducive to conventional bonding. For example, when bonding metals, the deposited material selectively bonds to certain areas, allowing for much higher adhesion strength than is achievable with conventional approaches. Second, Maxum Plus ensures a high degree of consistent and repeatable results, which is critical for mass production applications. Also, using K&S Maxum Plus eliminates significant edge trimming, drilling and scraping operations, which helps speed up the overall production process and saves time and money. Third, Maxum Plus is efficient and energy-saving. Compared to other high-performance bonders, it consumes less energy and also reduces waste thus saving on materials costs. In addition, it is easy to clean and maintain, thereby optimizing efficiency and reducing downtime for maintenance and service. Finally, K&S Maxum Plus is designed for superior durability, with a corrosion-resistant stainless steel housing. Overall, Maxum Plus offers reliable, high-performance bonding for both small and large production runs.
There are no reviews yet