Used SOLID STATE COOLING SYSTEMS ThermoCube 265 #9008352 for sale

SOLID STATE COOLING SYSTEMS ThermoCube 265
ID: 9008352
Chiller Operating range: -15 to 65°C standard range Cooling capacity: 265 W at 25°C (25°C ambient) Modes: fixed setpoint, cycling Ambient temperature: continuous operation in up to 50 °C ambient Repeatability: ±0.05°C, even near ambient Noise: 63 dBA at 3 feet Coolant: 50/50 water/glycol mixture, Galden/Fluorinert, or HFE Wetted materials: aluminum, polymers, stainless steel Power: 100-240 VAC, 50 or 60 Hz Standards: CE, TUV listed to CSA/UL 61010-1 Pumps: 4 pump choices Alarms: TTL (temp and system failure).
SOLID STATE COOLING SYSTEMS ThermoCube 265 is an industrial SOLID STATE COOLING SYSTEMS chiller designed for use in applications requiring precise temperature control. This system utilizes a hermetically sealed refrigerant circuit, SOLID STATE COOLING SYSTEMS, and advanced digital controls to provide efficient and reliable chilling of process fluids. ThermoCube 265 is capable of cooling process fluids ranging from 35 to 95 degrees Fahrenheit. It features a stainless steel reservoir and heat exchanger that are designed to provide uniform cooling with low maintenance. A digital thermostat is fitted on the unit to provide precise temperature control. The chiller's refrigerant circuit consists of a compressor, condenser, and evaporator that are regulated by a PLC-based microprocessor controller. This controller allows for precise temperature control and alarms for over and under temperature conditions. The fluid is circulated throughout the unit by one or two pumps that are sized to provide sufficient flow for the intended application. The unit is equipped with an external exhaust fan that is used to disperse any heat generated by the compressor and evaporator. The compressor and condenser are mounted on shockproof rubber mounts to reduce vibration and noise. The digital controls provide a range of diagnostic features that enable the operator to easily monitor and adjust the performance of the chiller. The system is provided with a digital filter change reminder, as well as high and low pressure alarms. SOLID STATE COOLING SYSTEMS ThermoCube 265 is designed to meet and exceed UL and CE safety requirements and is primarily aimed at industrial uses such as plastic injection molding, semiconductor processing, and medical device manufacturing. The unit is both environmentally friendly and cost effective, providing lower installation costs, simpler operation, and reduced energy bills. Overall, ThermoCube 265 is an ideal solution for those looking for reliable, efficient, and precise process cooling for their applications. Its advanced features, robust construction, and reliable performance make it a top choice for commercial and industrial uses.
There are no reviews yet