Used ADVANTAGE ENGINEERING M1D-5A #9284532 for sale
URL successfully copied!
Tap to zoom
ID: 9284532
Portable chiller
5 Ton capacity
Ambient air: 50ºF LWT and 95ºF
Air condensed refrigeration circuit:
Refrigerant type: R410A
Digital scroll compressor
Energy capacity modulation: 20-100%
High and Low refrigerant pressure limit switches and gauges
Condenser screen guard with air filter
Filter dryer
Sight glass with moisture indicator
Liquid line solenoid valve
Thermal expansion valve
Brazed plate evaporator with stainless steel plates
Copper plates
Condenser with copper tubes
Aluminum fins
Integral water circuit:
(2) HP Stainless steel pumps
ODP Motor: 12 GPM at 52 PSI
Discharge pressure gauge
25-Gallon insulated non-ferrous reservoir with sight tube
Overhead piping kit
Automatic low flow bypass valve
Automatic water make up system
ADVANTAGE M1D Microprocessor controller
NEMA 1 Control cabinet
Galvanized frame with powder coated enclosure panels
ABS Control panel
Approximate unit amps: 36 FLA at 208 / 230 V, 3 Phase, 60 Hz.
ADVANTAGE ENGINEERING M1D-5A chiller is a recirculating, heat exchanger designed to provide efficient cooling for a variety of industrial applications. It is a self-contained unit that can be installed outdoors or in a plant. M1D-5A features an integrated, direct digital control (DDC) panel and a powerful scroll compressor. The scroll compressor is a compressor type that uses two intermeshing spiral scrolls to compress refrigerant. This style of compressor requires less power than traditional reciprocating styles and provides cooling more quickly. The scroll compressor is powered by a V-belt drive system and is equipped with vibration dampers for quiet, reliable operation. ADVANTAGE ENGINEERING M1D-5A features a water cooled heat exchanger that consists of three separate coils: a hot water primary coil, a chilled water secondary coil and a condenser. The hot water primary coil absorbs heat from the air that is circulated through the chiller, while the chilled water secondary coil removes the heat from the circulating air. The heat is then transferred to the condenser, where the warm refrigerant gas is condensed into a liquid. The liquid refrigerant is then sent to the evaporator, where it absorbs heat from the warm air that is being cooled. M1D-5A is designed with a larger air-to-refrigerant heat transfer surface area than conventional chillers, resulting in higher heat transfer efficiencies. It also features an integrated economizer circuit, allowing for additional energy savings. The economizer circuit starts the chiller in low-load operation, reducing energy consumption by up to 65%. Additionally, ADVANTAGE ENGINEERING M1D-5A provides low head pressure operation, meaning it can use smaller cooling and condenser pumps than other chillers, reducing energy consumption further. M1D-5A is designed for reliability. It features a robust cabinet design to protect components from extreme temperature changes and other environmental influences. The sound-dampened cabinet also results in lower noise levels. Additionally, the DDC control panel includes diagnostic features to allow for optimal operation and maintenance. ADVANTAGE ENGINEERING M1D-5A chiller is an efficient and reliable solution for commercial and industrial cooling applications. Its scroll compressor and water-cooled heat exchanger provide efficient cooling at low energy costs. And its robust cabinet design and sound-dampening ensure quiet and reliable operation.
There are no reviews yet