Used BAC 3872C-PM-2/0 #9138542 for sale
URL successfully copied!
Tap to zoom
ID: 9138542
Vintage: 2010
Cooling tower
Fan Motor(s):
(2) 40 HP fan motor(s):
Totally Enclosed
Air Over (TEAO)
(1) Speed/1 Winding - Premium Efficiency (Inverter Duty)
suitable for 460 volt
(3) phase
60 hertz electrical service
Drives are based on 0 inches ESP
Unit Energy Efficiency per ASHRAE Standard 90.1-2004
CTI Certified Thermal Performance
Steel Panels and Structural Members are Constructed of Type 304
Stainless Steel
Unit Provided without Integral Cold Water Basin
Low Sound Fan Driven by BALTIDRIVE Power Train
Galvanized Steel Fan Guard
Fiberglass Reinforced Polyester (FRP) Casing Panels
FRP Air Inlet Louvers
PVC Film Wet Deck Material & Drift Eliminators
Structure Designed in accordance with the 2006 IBC
8" Top Inlet Connections
Hot Water Basiji Weir Dams
Aluminum Ladders Located on the End Front Right & End Back Left
Galvanized Perimeter Handrails
2010 vintage
BAC 3872C-PM-2/0 chiller recirculating heat exchanger is a highly efficient, hermetically sealed, low noise, rotary compressors cylindrical unit with an exchange area of 2/0 square measure. It is designed to capture and reclaim heat generated by compressors while transferring the absorbed energy to an external liquid medium. This chiller's configuration consists of twin isolated stainless steel evaporators, each with an inner and outer diameter of 50 mm. It has a stainless-steel header and shell, along with a condenser coil. The condenser coil is made up of copper tubes and aluminum fins, and the evaporator has three circuits; each circuit has an inner diameter of 30mm. For fluid medium, BAC 3872C-PM-2/0 chiller is designed to work with R-134a or R-1234yf type refrigerants for the cooling circuit, and R-134a, R-22, or R-410a type of refrigerant for the heating circuit. Each circuit is protected by individual flow regulators and pressure relief valves. The high-pressure side of the refrigerant circuit is fitted with a condenser fan to dissipate the heat generated by the compressor. The heat exchanger has a thermal load capacity of 17.8 kW heat produced by the compressor. Its maximum working pressure is 4.7 bar, and its temperature range is from -20 degree Celsius to +50 degree Celsius. BAC 3872C-PM-2/0 chiller also has low-noise operation (56dBA maximum), making it suitable for high-noise areas. Aside from its thermal load and temperature capabilities, the chiller also has a good safety rating. It is certified to UL 1991 standards for safety protection from short circuits, and also to UL 1995 standards for lockout protection. Furthermore, its housing includes an IP-54-rated protection from dust and moisture. In conclusion, BAC 3872C-PM-2/0 heat exchanger is a reliable and cost-effective unit. It has a high thermal capacity for its size, and the thermal and safety protections it offers ensure it will provide reliable service in all kinds of applications.
There are no reviews yet