Used NESLAB HX-150W CHX TC-300 #293659056 for sale

NESLAB HX-150W CHX TC-300 Recirculating Heat Exchanger is a reliable and efficient cooling system designed to protect sensitive laboratory equipment from thermal stress. The unit features a hermetically sealed evaporator, condenser and compressor, allowing for a safe and efficient operation. The chiller features two cooling circuits - a water loop and an air cooled loop. The cooling water loop circulates a coolant that is provided to the process fluid in order to dissipate heat from the system and transfer it to another heat exchanger. The air cooled loop circulates air that is passed over the condenser coils, causing the heat from the condenser to be expelled into the atmosphere. The resulting cooler air is then passed over the evaporator coils, where it condenses the evaporated liquid and transfers the heat from the process fluid to the atmosphere. The evaporator also helps to ensure that the process fluid is at its required temperature. The chiller is rated for a maximum working temperature of 40°C (104°F) and a maximum flow rate of 12GPM (3.5m3/h) with a maximum pressure rating of 100 PSIG (6.9 bar). This allows for a wide range of applications in a variety of processes, from basic laboratory use to high temperature industrial cooling systems. The unit also features a low-side purge valve, allowing for the discharge of any air that may have become trapped within the system, and a pressure relief safety valve. The pressure relief safety valve provides an extra layer of protection from thermal runaway caused by overpressure or excessive temperatures. HX-150W CHX TC-300 is designed for applications that require precise temperature control. The unit features a sophisticated electronic thermostat that can be set to an accuracy of ±0.5ºC. The thermostat also features various alarms that will detect any discrepancies in the temperature of the process liquid and act to shut off the machine if necessary. This ensures consistent and reliable temperature control and eliminates any potential hazards associated with an overly hot or cold machine running. The unit also features automatic defrost capabilities, enabling it to operate efficiently even during cold winter months. NESLAB HX-150W CHX TC-300 is also suitable for cooling applications in hazardous environments such as petrochemical or high voltage areas. The unit is housed in an enclosure made of stainless steel, which has been designed to meet the requirements of IP 65 which provides added protection against water, dust and hazardous chemicals. This makes the chiller safe and reliable even when used in hazardous locations. In conclusion, HX-150W CHX TC-300 Recirculating Heat Exchanger is a reliable and efficient machine designed to provide consistent temperature control for a variety of cooling applications. The unit's rated to a maximum working temperature of 40°C (104°F), and a maximum flow rate of 12GPM (3.5m3/h), with a maximum pressure rating of 100 PSIG (6.9 bar). The unit also features a sophisticated electronic thermostat to an accuracy of ±0.5ºC, and automatic defrost capabilities to ensure efficient operation even during the winter months. The unit is also housed in an IP65 rated stainless steel enclosure to provide further protection from hazardous environments. All these features make NESLAB HX-150W CHX TC-300 an ideal solution for cooling sensitive equipment in laboratories, petrochemical plants or any hazardous area.