Used TAKATORI MWS 34SN #9223100 for sale

TAKATORI MWS 34SN is an automated crystal growing, sawing, and slicing system made by TAKATORI Corporation. This is a very versatile system that can be used for a wide range of crystal growth, saw-cutting, and slicing applications. It has two main components: a reactor chamber and a slicing chamber. The reactor chamber is a sealed chamber made of stainless steel with an internal heating source, allowing for precise control of temperatures up to 1300°C. The slicing chamber consists of a motorized turntable, a saw blade builder (for constructing custom saw blades), and a slicing frame that holds pieces of quartz or sapphire for cutting. The reactor chamber is used for growing the crystals needed for slicing and saw-cutting. The chamber is filled with a pre-mixed reactant solution and heated to the required temperature for crystal growth. The temperature is carefully monitored, so that the growth parameters meet exact specifications. The slicing chamber is equipped with advanced precision cutting technology and a dedicated saw blade building process, allowing for controlled and precise cuts with minimal wastage. The saw blade building process uses a rotating non-magnetic holder for mounting the saw blade during cutting, and a movable carriage that slides on rails for precise adjustment of the relative positions of the blade and the material being cut. The saw blades can also be rotated on the turntable for making short compound cuts in a single operation, perfect for trimming round pieces of quartz or sapphire. TAKATORI MWS-34SN is highly efficient and reliable, and provides a very user-friendly interface. It is designed to meet the exacting cutting requirements of crystal growing and slicing with precision accuracy. This system can be used to produce high-quality crystals for a variety of applications, from optical imaging systems to semiconductors. The internal heating source also ensures that temperatures remain consistent throughout the process, while the motorized turntable gives accurate and repeatable slicing results. In addition, the saw blade building process ensures that all cuts are done with minimal wastage and minimal stress on the material being cut.