Used THERMCO BAXL #187836 for sale

THERMCO BAXL
ID: 187836
System 480v 55.5kw 73.6, 3ph, 60 hz.
THERMCO BAXL is a diffusion furnace designed to apply a variety of materials, from ceramics to metals, onto a substrate surface with a uniform and consistent surface finish. This machine provides superior process control and an ultra-fast heating rate, enabling shorter cycle times with a better surface finish. The dual-chamber design, with computer-controlled hot zone, ensures efficient process heating and accurate temperature control. The furnace is equipped with a fast-acting gas control system and programmable heat profile. The furnace consists of the main chamber, two vacuum chamberson top of the main chamber, and a manifold on the outside of the furnace. The furnace is constructed of stainless steel and is equipped with storage shelves, a built-in gas line, and a computer-based control system. It is a four-zone design, with the placeholders at zones one and two, the load port at zone three, and the work chamber at zone four. The load port and the work chamber are isolated from each other. The chamber is divided into three zones which are temperature controlled and separate. The main chamber is equipped with Teflon coated heaters, which provide accurate temperature control. An external thermocouple is used to determine the temperature in the furnace, while an internal one detects the temperature inside the chamber. The manifold is used to provide airflow through the chamber and to equalize the heat across the chamber. This results in a more uniform temperature throughout the chamber and reduces hot spots and temperature fluctuations. A range of accessories is also available to enhance the operation of the furnace. A pressure regulator with a built-in shut-off option can be used to control the flow of gas while a pressure gauge monitors the pressure of the furnace. A timer can be used to automatically shut off the furnace after a pre-determined period of time. A lift table and manual lifting mechanism allow for easy loading and unloading of the furnace. A crucible tong is used to move material from the load port and into the furnace chamber. The air blower helps to evenly distribute the airflow for uniform heating at higher temperatures. The ready mode on board the machine has " pre-programmed commands that allow for easy setup. This allows the user to save time on set-up and start the process faster. Finally, the furnace is rated to hold furnace material temperature up to 1,600 °C and can be used for a wide range of processes. This makes the furnace very versatile and can be used for a range of applications from ceramic coatings to furnace brazing.
There are no reviews yet