Used AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 70420A #113401 for sale
URL successfully copied!
Tap to zoom
ID: 113401
phase noise test set
Frequency range: 50 kHz to 1.6 GHz
Includes:
70421A Downconverter
70001A Mainframe
Offset frequency | Detector input frequency
0.01 Hz to 20 kHz ; 50 kHz to 500 kHz
0.01 Hz to 200 kHz ; 500 kHz to 5 MHz
0.01 Hz to 2 MHz ; 5 MHz to 25 MHz
0.01 Hz to 100 MHz ; 25 MHz to 250 MHz
0.01 Hz to 100 MHz ; 250 MHz to 26.5 GHz
Noise input port:
Frequency: 0.01 Hz to 100 MHz
Amplitude: 1 volt peak maximum
Input impedance: 50 ohm
Tuning voltage output:
Voltage range: -12 volts, open circuit
Current: -20 mA, maximum
Output impedance: 50 ohm
Noise floor degradation:
Degrade system noise floor 1 dB each dB reduction in R input < 15 dBm
Residual phase noise and spurious responses
Carrier frequency: 50 kHz to 26.5 GHz
HEWLETT-PACKARD / AGILENT 70421A Downconverter:
RF input: 1.0 GHz to 6.6 GHz
IF output: 5 MHz to 1.2 GHz
IF output power: 0 to +5 dBm
IF gain: 0 to 45 dB (5 dB steps)
Input power: +15 dBm maximum, 5 dBm minimum
Mixing spurious: <6 GHz: <50 dBc; >6 GHz: <70 dBc
Noise figure: 15dB
Installed option:
001: Add high input power capability.
AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 70420A is an electronic test equipment that is designed to measure a variety of parameters in both digital and analog circuits. It is a multi-channel, multi-function unit that provides high accuracy and reliability with a wide range of applications. HP 70420A is equipped with four independent channels for voltage, current and resistance measurement. Each channel is independently switchable so measurements can be taken simultaneously with any combination of the four parameters. The unit is constructed with a 7.4 inch (190mm) color-LCD display and a keypad with tactile buttons for easy operation. AGILENT 70420A is also equipped with a USB-A port for computer-controlled test sequences and two IEEE-488 (GPIB) ports for instrument control. The unit is capable of measuring voltage up to 200V and measuring current up to 5A. It also features auto- and manual-ranging capabilities as well as a low-pass filter for low-noise measurements. HEWLETT-PACKARD 70420A comes with four optional test fixtures: an electronic impedance probe (EIP-1), a power-line adapter (PPA-2), a voltage-current-measurement probe (VCM-1), and a voltage line adapter (VLA-1). The EIP-1 is designed for impedance measurements and the PPA-2 is designed for measuring the electrical parameters of power lines. The VCM-1 is designed for measuring voltage, current, and resistance, and the VLA-1 is designed for measuring frequency and phase angle. KEYSIGHT 70420A is an essential tool for troubleshooting and verifying component/circuit performance. With its four independent channels and versatile test probes, it can be used for a wide range of testing tasks, including checking circuit performance, monitoring power line parameters, and comparing component/circuit performance between different designs. Additionally, 70420A comes with a comprehensive set of application software for analyzing test results and creating reports. AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 70420A is a robust and reliable electronic test equipment designed to make quick and accurate measurements in both digital and analog circuits. It features four independent channels, auto- and manual-ranging capabilities, and a comprehensive set of application software. It is an essential tool for troubleshooting and verifying component/circuit performance, making it an ideal choice for engineers and technicians.
There are no reviews yet