Used AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 8484A #9209080 for sale

AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 8484A is an electronic test and measurement equipment designed for general purpose laboratory use. It measures basic RF parameters such as frequency, power, and return loss in both forward and reverse directions. Its high accuracy receiver coverage from 10kHz to 110GHz provides reliable and repeatable measurements in numerous applications as well as flexibility in selection of optimum test conditions for each component. HP 8484A measures power up to 120W and offers both CW and AM/FM tone inputs. Its frequency counter is capable of measuring up to 1000MHz and boasts an accuracy of ±50ppm. The DIGITIZER/RECORDER uses an IEEE428.3-TM and HPIB interface. It measures to a resolution of 0.1μV with a response time of under 500 μs thanks to the high resolution A/D converter. Its display capabilities consist of numerically, via the backlit LCD, and graphically via CRT display. A built-in RF circuit calibration procedure compensates for gain, phase, and group delay frequency errors. Noise figure measurement is possible with the optional noise figure sensor and RF generator. AGILENT 8484A offers a range of control capabilities such as: timing generator with 16 user definable waveforms; dual attenuators with ≤30 dB dynamic range; and temperature control of test set-up components. Along with industry standard I/O protocols such as IEEE488.2 and GPIB, control and monitoring is possible via the LAN, HPLC or HPIB. For the safety of the user, 8484A meets the requirements of IEC1010-1, Second Level and the chassis is shielded to minimize potential damage from sudden electrical spikes. The DC coupled inputs are protected against voltage surges and RF signals in excess of 15dBm. In conclusion HEWLETT-PACKARD 8484A is a high performance, multi-function instrument designed for laboratory use. Its broad frequency coverage, extensive I/O support, comprehensive control and monitoring features, and high-accuracy receiver make it an ideal choice for general purpose electronic test and measurement applications.