Used AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 8510C #9154243 for sale

AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 8510C is a network analyzer for measuring network parameters of complex RF/microwave signals. It is designed to provide accurate measurements of amplitude, frequency, and phase characteristics of single-ended or differential transmission and reflection signals at the microwave and millimeter-wave frequencies. The analyzer is based on a combination of manual and computer-generated measurement techniques to measure the performance of active, passive, and mixed-signal components and assemblies, including antennas, filters, amplifiers, and oscillators. HP 8510C combines the mechanics of a vector network analyzer with a solid-state microwave source and detector. This results in a wide range of frequency coverage from 100 kHz-22 GHz. AGILENT 8510C is well-suited for the characterization of single-ended and balanced devices, as well as broadband systems that require impedance matching. It offers a choice of a frequency band of 1/2 or 1 octave. KEYSIGHT 8510C is equipped with a wide range of signal inputs and outputs and a frequency synthesizer. Its input connector is designed to work with unbalanced RF signals. It has a nominal input impedance of 50 ohms and two input ranges of 5 mW and 50 mW. HEWLETT-PACKARD 8510C has four reference levels covering the input range of -30 to +20 dBm. To compensate for cable loss, the user can adjust the reference level to a positive or negative value depending on the type of device under test. 8510C comes with a variety of levels measuring features. These include s-parameter measurements, insertion loss, return loss, voltage standing wave ratio (VSWR) measurements, compact media evaluation, small- and large-signal gain/phase measurements, harmonic distortion analysis, noise figure measurements, group delay measurements, and time-domain measurements. AGILENT / HP / HEWLETT-PACKARD / KEYSIGHT 8510C also comes with a built-in Smith chart and spectrum analyzer features. HP 8510C also has a powerful software package, which provides a graphical user interface for the programmer. The software can be used to configure and analyze measurements, as well as to create test scripts and perform automated measurements. The software also provides control of the instrument via remote computer or GPIB bus. AGILENT 8510C is a versatile instrument that offers reliable and accurate measurements for a wide variety of components and assemblies. The combination of manual and computer-based measurements and the powerful software package provide a complete solution for RF/microwave component characterization.