Used ANRITSU MN7464A #9247450 for sale

ANRITSU MN7464A is a multichannel general purpose scanning receiver designed for use in various RF measurements. The instrument provides precision tuning and attenuation, as well as telemetry and frequency sweeps. Its wide frequency range, dynamic range, fast-response time, and excellent stability make it suitable for a variety of receiving and measuring applications. MN7464A is equipped with a 266 MHz wide, selectable range synthesized receiver with 50 dB of dynamic range. It has a maximum absolute error of ± 0.5 dB for frequencies from 0DBm to 20 dBm, 1PPM reference frequency accuracy, and a maximum 30 dB of attenuation. It also offers counter-based receiver outputs for digital-to-analog conversion. The instrument includes a dual-channel Sweep mode which can sweep and counter over a wide frequency range. The counters and level meter support 16-bit resolution in both dBm and dBmV. The maximum sweep rate is 200 Hz. In continuous mode, each sweep cycle can monitor up to 2000 channels. Frequency, step width, and output levels can be varied over the span. ANRITSU MN7464A provides additional functions such as the Remote Control Interface (RCI) for remote operations. It also enables customizing the instrument's front panel settings according to the user's requirements. In addition, the unit can be remotely switched between the frequency and scan modes. MN7464A also provides a generation of TELEMETRY codes (TR), and processes and reports TR commands transmitted from a host system. The TR command list can be transmitted to the instrument, and the corresponding command response can be transferred back to the host system. ANRITSU MN7464A is a reliable, versatile scanning receiver that can be used in both laboratory and field applications. Its advanced signal processing capabilities, combined with a comprehensive feature set and robust error checking and troubleshooting capabilities, provide users with precision measurements, greater accuracy, and improved operational efficiency.