Used FLUKE X11644A #9107474 for sale

FLUKE X11644A is an advanced electronic test equipment made for precision measurement of hard-to-test circuits. The equipment is capable of troubleshooting component-level test problems, measuring precise data points, and recording results with an accuracy of 1.5%. The equipment consists of two parts: a controller module and a probe unit. The controller module has a user-friendly graphical interface which is capable of providing visualized data points and allowing for manipulation and troubleshooting operations. It has a 5.1-10.5 VDC power supply, with a maximum current range of 0-160 mA and a built-in digital readout to display readings on the screen. The probe unit has an insulated probe tip to reduce electrical noise and a built-in multimeter to measure voltage, current and frequency. The multimeter is designed with up to 4.5 digit accuracy and operates between 30kHz and 2.5MHz with a minimum resolution of 10 μV. It has a detachable coiled cord with a switch for activating the measurement mode. The measurement range is 0 to 200V DC, 0 to 2000mV AC and 0 to 20Vpp. In addition, X11644A is designed for high-speed data analysis. It has a high-speed data acquisition mode which can store 4K readings per second, a signal filtering mode with adjustable low-pass and high-pass filters for noise reduction, and a waveform storage mode which can store up to 32K readings. It also has a built-in 20MHz logic analyzer which can detect logic pulses and store them up to 8K samples. Overall, FLUKE X11644A is a high-precision tool designed for precision diagnostics and precise data acquisition. With its user-friendly graphical interface, wide measurement range and high speed data acquisition mode, it is a versatile tool for investigating complex circuits and making precise measurements.