Used LITEPOINT IQ2012 #9232348 for sale

LITEPOINT IQ2012 is an advanced electronic test equipment used for the testing and characterization of RF-based wireless technologies. It is used to ensure the performance inteligently designed products that operate on various wireless technologies. IQ2012 is capable of performing a variety of measurements including embedded WLAN and Bluetooth test, over-the-air protocol analysis, device characterization, calibrating transceiver qualification, as well as predictive optimization for RF product design. LITEPOINT IQ2012 allows the optimization of power efficiency, as well as signal reliability. IQ2012 is also able to analyze both time- and frequency-domain measurements. The instrument comprises two independent hardware-enabled tasks. The first task is an analog-todigital (ADC) board, and the second task is an interface for the control application used to configure the instrument. The ADC board contains two different measurement channels, which can measure signals from -25 dBm to +20 dBm. The two channels have 8 bits of resolution and are powered by quadraphase demodulation of the signal. The bandwidth for each channel can be biased between 5 kHz and 6 GHz. The control application is used to set parameters and control the instrument. This application is used for parameter tuning, modulation analysis, adjacent channel power ratio (ACPR) measurements, spectrum mask testing, and other tests. The application is easy to use and provides a comprehensive display of the test results. LITEPOINT IQ2012 also provides an extensive set of interfaces, such as USB, Serial, Ethernet, IEEE 802.11 a/b/g/n, Bluetooth 2.0 and 5.0, and ZigBee. Through these interfaces, users can access a variety of additional features, such as deep analysis of protocol behavior, high bandwidth link testing, power saving mode, internal calibration storage, and automated test sequencing. IQ2012's high-end automation capabilities reduce the need for manual operations, saving both setup time and cost when carrying out tests. Additionally, the station is designed for customization and can be used in multiple different applications. Furthermore, LITEPOINT IQ2012 provides customization of hardware, firmware, and software for a variety of RF tests. Lastly, IQ2012 offers accurate measurements with low data latency, minimizing the chances of connectivity-related issues.