Used ROHDE & SCHWARZ ESHS 10 #9292511 for sale
URL successfully copied!
Tap to zoom
ID: 9292511
EMI Test receiver
High measurement accuracy and typical error: 0.5 dB
Wide dynamic range and typical noise figure: 7 dB
With preamplifier
Third-order intercept point without preamplifier: 20 dBm
Calibrated attenuator with high pulse: 10 dB, 0 to 120 dB
Preselection filters
Preamplifier with wide dynamic range
High level mixer with high oscillator rejection
Delay equalized IF filters
Demodulation:
Parallel detectors: Peak and quasi-peak indication
Quasi-peak operating range: 60 dB
Linear envelope detector dynamic range: >70 dB
AM and A0 Demodulators
Powerful processor system:
Flash EPROMs update through PC
12-bit A/D converter
With short conversion time
Measurement time: 1 ms to 100 s
Frequency: 9 kHz to 30 MHz
Automatic scan: RF Analysis
7-Digit LCD display
Resolution: 10 Hz
Frequency drift: <3 x 10^-6 +30 Hz
Maximum input level:
RF Attenuation: ≥10 dB
DC Voltage: 7 V
Sinewave AC voltage: 137 dBμV
Maximum pulse voltage: 10 μs, 700 V
Maximum pulse energy: 10 μs, 100 mWs
Image-frequency rejection:
IF: >90, 100 dB and >75 dB
IF rejection: >90, 100 dB
RF Shielding
IF Bandwidth
Remote control
Voltage measurement range: fin >50 kHz
Front-panel outputs
Rear-panel outputs
Interfaces
Rear-panel inputs.
ROHDE & SCHWARZ ESHS 10 is an electronic test equipment designed to measure various properties of electronic signals and components with precise accuracy. It features a high-precision, low-noise, low-distortion architecture, providing fast, accurate, and reliable measurements in all environment conditions. This versatile, high-end device is designed to take care of all the necessary measurements in laboratory and production tests. With its flexible design and robust construction, it is ideal for all kinds of electronic measurements, from research and development, to manufacturing, to service and maintenance. ESHS 10 has a large measuring range that covers up to 1200 mV peak or 1V peak on both DC and AC signals. It has a better than 0.05% accuracy performance, making it suitable for a wide variety of applications. The accuracy performance is further enhanced by a 16-bit digital signal processor (DSP) for data acquisition and digital signal processing. ROHDE & SCHWARZ ESHS 10 offers a wide frequency range, from very low frequencies (VLF) up to 6 GHz. It includes many features such as low distortion, low noise, fast settling time, variable gain, phase shift, tracking, crosstalk, and flattening correction. This allows for precise measurements even under tough conditions, so it's a great choice for measuring RF, digital, acoustic, and optical components. ESHS 10 is equipped with a user-friendly software suite for the setup, operation, and data acquisition. The suite is integrated in the device's hardware and includes a range of integrated measurement and calibration tools. The supported features include automated calibration, automated signal generation, automated switching, automated electrical parameter measurements, and more. In addition, ROHDE & SCHWARZ ESHS 10 features a range of accessories and add-on modules, allowing the user to customize their device to their own specifications. This allows the user to tailor the device to the needs of their own particular application, making the most out of their purchase. For applications such as R&D, debugging, service and maintenance, military and aerospace, and general electronics test and measurement, ESHS 10 is a great choice. With its high-precision, high-performance architecture, and extensive range of features, it is an essential device for any lab or test environment.
There are no reviews yet