Used BAHNSON ENVIRONMENTAL SPECIALTIES ES2000 CDMD-BT #9364575 for sale

ID: 9364575
Environmental chamber CDMD: Refrigerant cooled with humidification Desiccant based dehumidification Temperature and humidity control -BT = Benchtop 12 cu.ft (2) Shelves Temperature range: 2 - 70°C Humidity range: 10 - 96% RH Condensing unit: 1/3 HP, R134a Electrical power: 208-230V, 60Hz, Single phase Voltage utilization: 198 - 253 Full load amps: 21.3 Cord set: NEMA 14-30 Total heat of rejection: Minimum: 1876 W at 25°C Maximum: 1920 W at 10°C Ambient temperature: 18°C to 25°C Ambient humidity: 45 to 55% RH Operating altitude: <2000m Indoor operating environment Temperature uniformity: +/- 0.3°C Humidity uniformity: +/- 3% RH Interior dimensions (WxDxH): 91 cm x 65 cm x 62 cm (2) Stainless steel shelves Shelf area: 2.4 m² Alarm signals: Visual, audible, dry contacts Water supply requirements: < 0.5 ml/s at < 1.7 bar Water quality resistivity limits: > 25 k ohms and < 15 M ohms Water supply / Drain connection: 0.25" OD Tube quick connect Water quality equivalent hardness: < 20 ppm or 1 GPG Water quality pH level: > 6.7 Waste water drain: 0.05" OD Stainless steel Typical heat up time: (30 Sec, door open) Ambient: + 37°C , < 5 Minutes +37°C to + 50°C, < 7 Minutes +10°C to + 50°C, < 15 Minutes Typical recovery to setpoint: (30 Sec, door open) + 50°C, < 2 Minutes + 10°C, < 3 Minutes Process air: Fan motor power: 0.090 kW Free blowing: 50 Hz (m³/h) at 100/120 Rated airflow: 0.025 (m³/s) 90 (m³/h) Static pressure: 50 Hz at 100 60 Hz at 120 Reactivation air: Rated airflow: 0.005 (m³/s) Rated airflow: 20 (m³/h) Available static pressure: 100 (Pa) Reactivation air heater: Heater power: 0.65 kW Temperature increase across heater: 97°C Operating temperature: -20 / +40°C Drive motor power: 5W Maximum noise level unducted: 56 dBA EU3 Air filter MUNTERS MG90 Desiccant dehumidifier Power: 115V, 50/60Hz, Single phase.
BAHNSON ENVIRONMENTAL SPECIALTIES ES2000 CDMD-BT environmental chamber is designed to simulate a wide variety of environmental conditions by creating a controlled environment with adjustable temperature, relative humidity, light, and ventilation. ES2000 CDMD-BT consists of four main components: the control interface, the environmental chamber, the cabinet, and the power supply. The control interface of BAHNSON ENVIRONMENTAL SPECIALTIES ES2000 CDMD-BT is a touch-screen equipment offering easy selection and adjustment of environmental conditions. This interface can provide precise, real-time readings of temperature and humidity, and allows the user to input and adjust light levels, ventilation rates, and other settings. The interface also offers a high level of precision and accuracy, making it ideal for research and testing. The environmental chamber consists of a double-insulated chamber with sturdy insulated walls and ceiling. The chamber is well-insulated to ensure stability in temperature, humidity, light, and ventilation. Temperature range settings are adjustable from 1°C to 70°C, and relative humidity range settings from 10% to 100%. Industrial-level LED lighting can be adjusted to simulate sunrise and sunset for photo-biological experiments, and an onboard air cleaner helps to maintain clean air in the chamber. The cabinet of ES2000 CDMD-BT houses all electronic components, such as the control panel, fan, and air filter. This cabinet also features a tabular, adjustable shelf system to accommodate sample placement. BAHNSON ENVIRONMENTAL SPECIALTIES ES2000 CDMD-BT is powered by an integrated power supply that ensures consistent and reliable operation of the chamber. An alarm unit that monitors and sounds a warning: in case of power failure, temperature or humidity outside the accepted range, a malfunction in the electronics, or other conditions. In conclusion, ES2000 CDMD-BT offers an accurate and reliable environment for a wide range of experiments. The chamber's adjustable temperature, humidity, lighting, and ventilation settings allow for realistic simulations of environmental conditions, and its sensitive alarm machine provides a high degree of safety. BAHNSON ENVIRONMENTAL SPECIALTIES ES2000 CDMD-BT is sure to provide users with a powerful and secure environment for their research or testing needs.
There are no reviews yet