Used ESPEC LH-113 #9032243 for sale

ESPEC LH-113 is an environmental chamber specifically designed for laboratory and industrial testing applications. This chamber is engineered to simulate a wide variety of environmental conditions including temperature, humidity, light, pressure, and vibration. The temperature range of LH-113 is between -18°C and 80°C and is designed to maintain a temperature stability of +/- 0.5°C. Humidity can be adjusted between 5% and 95% with a differential saturation of 2% or less. The light levels within the chamber are adjustable from 0 lux to 30000 lux. The chamber is also capable of achieving vacuum and pressure ranges of 0.666kPa to 101.324kPa with a resolution of 0.001kPa. Vibration testing is also available with a frequency range of 10-100Hz and displacement of 0.019/m. The interior of the chamber is constructed of corrosion resistant stainless steel with reinforced walls to ensure the chamber's thermal and mechanical stability. ESPEC LH-113 also features a built-in airflow system for temperature and humidity control. The air volume and velocity are adjustable to ensure the chamber provides a uniform temperature distribution. The chamber is equipped with an advanced controller that provides a range of features including a manual mode for testing, a simulation mode for profiles or time-based settings, and an alarm setting to alert operators to temperature or humidity flux. The controller reads data points from an integrated sensor (thermocouple) from which the controller can then adjust air flow and other controls to maintain set parameters. The displayed temperature/humidity profile of the chamber is also displayed with a 255ß resolution LCD display. Overall, LH-113 is a high performance environmental chamber designed for extreme testing conditions and complex testing needs. It offers high temperature and humidity control accuracy, adjustable light levels, vacuum and pressure capabilities, and a built-in vibration component. Its intuitive controller and advanced sensor technology provides feedback to ensure the chamber is always performing within the desired parameters for optimal test results.