Used HODGE 2116 #179900 for sale
URL successfully copied!
ID: 179900
Autoclave
60” ID x 12ft Long Autoclave Vessel
48” ID x 8ft Long Work Area
Maximum Design Pressure: 100 PSIG
Pressure Rate: 0-10 PSI/Minute Average
Depressurization Rate: 0-10 PSI/ Min. Average based on load
Pressure Control Accuracy: +/- 1 PSI
Pressure components:
Inlet and Exhaust Valve
Pressure Transducer
Monitoring and Data Acquisition
Temperature:
Maximum Design Temperature: 500°F
Heating Rate: 0-10°F/Min based on air temperature and autoclave load
Cooling Rate: 10°F/Min based on average air temperature and autoclave load from maximum working temperature to 150°F
Customer must have cool water
Temperature Control Accuracy and Uniformity: +/- 5°
Door accessories:
Door Safety Limit Switch
Door Seal
Hydraulically Operated
Insulation Liner and 3” of Insulation
Insulation:
The interior of the autoclave will be insulated with 3” of high temp insulation
The insulation will then be covered by aluminized sheet metal
All exposed surfaces will be painted with industrial enamel
The autoclave will meet OSHA hot surface guidelines
Exterior:
Painted with heat and corrosion resistant primer and paint
Temperature Monitoring Devices:
(12) Thermocouples included
Cooling System:
Modular cooling coil located in front of electric coil
Cooling water supplied by others
Requires cooling water equivalent to a 21 ton cooling tower to achieve 6 Deg. F. per minute cool down
Cooling tower available
Vacuum System:
Vacuum manifold included
Vacuum Pump included
(5) Vacuum lines included
Chamber Pressure:
Chamber Pressure controls for air or nitrogen with data collection included.
Compressed nitrogen provided by others
Controls:
Windows based Industrial PC Programmable Control System using Phoenix Logic Ethernet for autoclave with the following features: (with no manual overrides)
Control heating ambient – 450 Deg. F. at 0-10 Deg/Min F. Loaded based on 1,000 lb. of steel tooling and 1,000 lb composite product load.
Run at precise temperature ambient – 450 Deg. F. for programmed time period
Total automatic control of cycle sequences from beginning to end
Operator controls for locking door. 1.5 PSI Door Interlock
Process complete and ready to open door indicator lights
Temperature and Pressure safety back ups
Full program editing and storage capabilities
Remote monitoring of the system is available by Ethernet Connection
Thermocouples quoted separately
Vacuum Lines quoted separately
Tracks:
Track support and angle iron tracks provided. The tracks will be able to handle the customer supplied cart
Cart is available at an additional cost
Valves:
Safety relief
One Pressure transducer for controlling pressure
Pressure switch for high pressure alarm
Safety:
Man in cave safety switch
Optional:
Vacuum Line with:
Two motorized ball valves
Transducer with data collection
Manual ball valve
Pressure gauge
Three way ball valve for transducer calibration
Optional:
Thermocouple jacks with data acquisition
2 HP vacuum pump
25 Ton cooling tower with controls, pump storage and storage tank.
HODGE 2116 is an environmental chamber specifically designed for testing a variety of materials for durability and reaction in different climates. This laboratory equipment is used to accurately simulate varying temperatures, relative humidity and air pressure in an enclosed area. The chamber has a temperature range from -60°C to +150°C, a temperature uniformity of ±0.5°C and a temperature uniformity stability of 0.2°C. Its relative humidity range spans from 0 to 95%. The unit uses evaporative heat transfer to control both temperature and humidity. Its patented design has an exhaust system with special filters so that the atmosphere produced inside the chamber, as well as the environment outside of it, remain unaffected. In addition, the chamber is also equipped with a digital controller that allows the user to set precise conditions, making it easy to manage the environmental settings inside the chamber. 2116 offers a programmable timer that allows for long-term tests over a wide range of temperatures and humidity levels. The chamber also boasts two thermocouples for measuring temperature, one in the control cabinet and one in the conditioning cabinet, offering real-time temperature readings. Furthermore, the chamber's top-of-the-line, intelligent controllers allow for precise and repeatable test settings, ensuring that the tests conditions remain consistent and reliable. The rugged construction and frame of HODGE 2116 is designed for maximum rigidity and durability, with a stainless steel interior wall that can withstand harsh conditions for longer test duration periods. The chamber's one-of-a-kind precision-sealing system offers leak-proof and dust-proof insulation. This environmental chamber offers reduced noise levels and optimal cooling, making it ideal for applications requiring near-silent operation. Furthermore, 2116 is designed with a compact and transportable form factor, allowing it to fit in any standard laboratory space and facilitate easy movement between laboratories. With easy-to-use controls, the chamber makes troubleshooting and maintenance easy and efficient. All in all, HODGE 2116 environmental chamber is a purpose-built instrument, expertly designed with durability and precision in mind, and is ideal for a variety of materials testing applications.
There are no reviews yet