Used SUN SYSTEMS EC11 #198464 for sale
URL successfully copied!
Tap to zoom
ID: 198464
Environmental test chamber with inert
7 Cubic feet volume
Power Requirements: 220 VAC / 60 Hz
Integral user temperature probe
-73°C to +315°C Cooling or LN2, -184°C to +315°C -(this unit does not have a cooling setup but it can be added)
IEEE-488, RS232, RS422 Remote Communication
Expanded I/O Architecture - Analog Input Ports, Analog Output Ports, Auxiliary I/O Drivers, Digital Parallel Port, High Speed Serial Link
Local Temperature - Controlled Ramping
Internal Dimensions: 12.0" W x 9.75" H x 10.25" D (30.5 cm x 24.75 cm x 26.0 cm)
Coolant Input: LCO2 37° male fitting, 1/4" tube
Optional LN2: 45° male fitting, 1/2" tube
Exhaust: 3/8" NPT, male
Temperature Ramping Rate Range (Heating and Cooling): 0.01°C to 48°C/min (0.02°F to 86°F/min)
Number of Programmable Temperature Setpoints: 100+
Time at Temperature Setpoint Range: 1.0 sec to 99 hr, 59 min, 59 sec
Number of Programmable Set Times: Typically 100+
Air Circulation: 120 CFM, vertical
Absolute Error Over Temp Range (Not Including Probe Error): ±0.5°C (±0.9°F)
Temperature Resolution (Approx.): 0.02°C (0.04°F)
Long Term Stability (Per Month): ±0.2°C (±0.4°C)
Line Voltage Sensitivity: ±0.1°C (±0.2°F) for ±10% Line Voltage Change
Ambient Temperature Operating Range: 0°C to 50°C (32°F to 122°F)
Local Control: 29 Key Keyboard (2 Line LCD Display)
Remote Control: RS232 / RS422 / IEEE-488 bus
IEEE-488 to RS232/RS422: Software/Bidirectional Transparent Operation
Safety:
Line Voltage Dropout: Program and Parameters Stored in Battery Backed Memory (Programmable Automatic Restart after Power Loss)
Fail Safe: Open/Short Probe Detection, Watch-dog Timer, Software Temperature Limits, Over-temperature Thermostat
Electrical:
Heating Input: 3600 Watts
Power Requirements: 4200 Watts max, 220 VAC, 50/60 Hz, 1 Phase.
SUN SYSTEMS EC11 is a state-of-the-art environmental chamber designed for a wide range of applications, from measurement of air temperature and humidity to photothermal assessment. The chamber allows for precise control of temperature, humidity, light, and voltage, enabling research and experimentation in a variety of environments. This environmental chamber has a temperature range of between -130°C and 200°C. Humidity can be controlled from 0 to 95%RH with ±2%RH repeatability. The air velocity is also adjustable from 5 to 50cm/s via the chamber's built-in fan. Finally, the chamber can apply up to 600V and 20A DC, allowing for a variety of voltage or current tests. The chamber's construction and overall design are of top-notch quality, providing excellent mechanical/electrical integrity and stability in all environmental conditions. The entire unit is made of stainless steel and aluminum, ensuring maximum durability and protection against outside influence. Additionally, the inner racks and shelves are made of alloy wire, aluminum, and titanium - further contributing to the chamber's superior performance. Moreover, EC11 features advanced digital controllers and displays that allow for easy operation and monitoring. Multiple sensors are used to ensure that temperature and humidity remain consistent, while the chamber's software can be easily programmed and loaded with test and measurement sequences. The data can then be quickly retrieved and processed for further analysis. Finally, there's an optional environmental cycler which adds even more control options to the chamber. This accessory can be used for automating temperature and humidity sequence measurements for applications such as accelerated aging tests. Overall, SUN SYSTEMS EC11 is a reliable and robust environmental chamber that can be used in a variety of applications. It's highly versatile, providing accurate and consistent environmental conditions in the laboratory or production line. Advanced digital controllers and displays make it easy to use, while its high-quality construction ensures durability and long-term reliability.
There are no reviews yet