Used AMAT/ APPLIED MATERIALS Centura AP DPS AdvantEdge G2 Metal #293822272 for sale

AMAT / APPLIED MATERIALS Centura AP DPS AdvantEdge G2 Metal etcher / asher is a state-of-the-art, efficient tool utilized in the etching and ashing of a variety of metallic materials. The tool is designed to produce micro-sized features with a high degree of precision and accuracy. The system utilizes a combination of physical and chemical etching / ashing processes to achieve both rough and smooth results, depending on the application required. AMAT Centura AP DPS AdvantEdge G2 Metal utilizes a plasma etch process that is similar to the traditional reactive ion etch process. The differences, however, include the ability to use a greater variety of etchants and to adjust the etching parameters to optimize the results based on the specific material. The tool features automated process control, allowing the operator to quickly adjust parameters and repeat procedures to ensure consistent results. The etcher / asher uses a high pressure chemical etching process to chemically remove material from the substrate surface. The chemical etching works by exposing the substrate to a corrosive etchant that breaks down the material at an atomic level. This etching process allows for the production of thin layers of conducting and non-conducting materials, as well as fine-grained, highly uniform features. The tool also features an ashing procedure that can be utilized to clean and remove contaminants from the substrate prior to etching. The ashing system works by exposing the substrate to an oxygen-rich plasma that oxidizes the contaminants, leaving the substrate clean and ready for etching. In addition to the high-precision etching and ashing processes, APPLIED MATERIALS Centura AP DPS AdvantEdge G2 Metal also features a high-density lithography system. The lithography allows for the creation of extremely fine features, down to a few nanometers in diameter. This enables the fabrication of extremely small devices and features that could not be produced with any other process. All of these features combine to make Centura AP DPS AdvantEdge G2 Metal an ideal tool for etching a variety of metallic materials with a high degree of precision and accuracy. The tool allows operators to quickly and consistently produce thin layers of conducting and non-conducting materials, as well as to create extremely small devices and features, making it an invaluable tool in the fabrication and production of electronic components and equipment.