Used HITACHI M 511E #293761788 for sale

HITACHI M 511E Peripheral Interface Unit is a high performance etch/ash processor designed for use in CAD/CAM applications for printed circuit boards. M 511E features a 200KHz internal clock rate, multiple output ports for controlling stepper motors, a 12 bit slice command bus, and onboard memory for storing program data. The unit can be integrated into existing systems allowing for simple setup and maintenance needs. HITACHI M 511E offers a range of settings to control the width, size and step of etching or ash patterns. This is done with a series of internal registers, including the accelerator register and the command register. These registers are programmed with a serial port or the computer's parallel port. M 511E is capable of transferring data quickly, and integrates with various software programs. The casing of HITACHI M 511E is robust, with a die-cast aluminum enclosure and an absorbent construction to protect against EMI emissions. This also allows it to be used in hazardous environments because of its low voltage and zero CED emissions. M 511E offers a reliable and consistent output and can be connected to a variety of different motors, axes and linear encoders. HITACHI M 511E also offers a built in digital signal processor with four 12 bit analog-to-digital converters and ten digital-to-analog converters. This allows it to be used as a dedicated etch/ash controller with up to an 8 kHz sampling rate. It's also capable of processing signals for other operations, such as sorting and routing. M 511E can be used in conjunction with an external controller such as a PLC or a PC for integrating into the overall system. HITACHI M 511E offers power efficiency with a power supply rated at 5V, 7A and 12V, 5A. This results in lower running costs and generates less heat. M 511E can also be programmed in different languages, allowing for easier operation and programming. With a wide range of inputs, outputs, and digital-to-analogue converters, HITACHI M 511E provides a versatile solution for printed circuit board etching or ash operations.