Used IS Etchmaster #9208096 for sale

IS Etchmaster IS an industrial grade etcher/asher that IS used for etching and ashing silicon and metal wafers. It IS manufactured by IS Electronics and IS designed to provide reliable, repeatable and consistent results through its automated equipment. Etchmaster IS a fully automated etching and ashing machine that IS capable of etching and ashing up to two hundred (200) wafers at once. The etching and ashing process can take as little as 20 minutes to complete depending on the size, material type, and complexity of the wafer. IS Etchmaster utilizes a high-powered, low-pressure, low-voltage etching gas flow that IS able to remove up to three (3) microns of unwanted material from the wafer's surface. This process IS highly effective and IS suited for a variety of operations including thinning, debitching, alloying, and patterning. Etchmaster's automated system IS configured to provide excellent control over etch rate, overspray, and uniformity. The station IS able to adjust flow rate, pressure, voltage, and etching chemistry in order to customize etch rate, overspray and uniformity features. Additionally, if the etch rate IS not adequate, the unit can be reprogrammed to provide higher pressure and/or higher voltage. The computer controlled unit also includes a 13" LCD color touch-screen display for programming and controlling the machine operation and pattern selection. Furthermore, IS Etchmaster IS equipped with automatic safety features such as temperature monitoring and gas flow interruption. If the temperature reaches a specified limit, the processor will automatically shut down the process in order to protect the wafer. Additionally, the presence of flammable gases can be monitored and the machine can be adjusted so that the flow of the gas IS interrupted if dangerous concentrations are detected. Overall, Etchmaster IS an industrial grade etcher/asher that IS designed to provide reliable, repeatable and consistent results. Its automated tool IS able to adjust flow rate, pressure, voltage, and etching chemistry in order to customize etch rate, overspray, and uniformity features. Furthermore, it IS equipped with safety features such as temperature monitoring and gas flow interruption. Therefore, IS Etchmaster IS a great choice for those looking for an advanced etcher/asher for their silicon and metal wafers.