Used SAMCO UV-1 #293626878 for sale

SAMCO UV-1 is an etcher or asher typically used in the manufacturing of printed circuit boards (PCBs). It is designed to create or "etch" the necessary pathways for circuitry on a board by removing material from the surface. This etcher or asher uses ultraviolet light to do this instead of relying on chemical etchants. This allows for a faster, more efficient process with better repeatability. SAMCO UV 1 consists of a UV light source, a table to hold the PCB, and a etching head. The UV light source consists of a UV fluorescent tube and a power supply all mounted inside of a UV light box. This light box is made of special glass to protect the user from the UV light, while allowing the light to reach the surface of the PCB. The etching head is a precision mount with a concentric system of lenses that allow the UV light to be focused on the desired areas of the PCB. The PCB is placed on a table and aligned with the etching head. In operation, the PCB is aligned so that the etching head is directly over the desired area of the board. The UV light is then turned on and the material on the board is exposed to the UV radiation. The material is then gradually removed based on its sensitivity to the UV radiation. The etching head is then moved to the next location for etching. This process is repeated until the desired pattern of pathways is achieved on the board. UV-1 is a reliable, efficient and cost-effective piece of equipment used in PCB manufacture. It provides a safer, faster and more repeatable process than traditional chemical etching methods, which creates a more accurate, uniform result compared to the older process. Additionally, it greatly reduces the cost of materials and the time required for etching the PCBs.