Used DELATECH 859 #150921 for sale
URL successfully copied!
Tap to zoom
ID: 150921
CDO system
Thermal reaction section: 800°C
Resistive heating element and cylindrical liner
Recirculating water scrubbing section
Spray chamber in primary cooling / Scrubbing for liquid
Scrubbing of soluble gases and particulate
Counter-current packed bed liquid scrubber
Liquid scrubbing and fine particulate removal
Exhaust port inlets: Up to (4) 1 ½"
Process inlet: 100 SLM Per inlet
Conductivity liquid level sensor with purge
Magnehelic: 0.5" to 5"
Temperature controller
Exhaust moisture suppression system
Ground fault circuit interrupt
Water saving recirculation system
Sump pump to drain
Ports:
Single port: KF-50 2"
Two port: KF-40 1.5"
Four port: KF-40 1.5"
CDI Exhaust:
Halar coated stainless, 4": 315 L Or PVDF
Connection: ISO (100mm)
Required draw/Flow: 4.5" to .5" WC, 20 CFM maximum
Cabinet exhaust:
Metal duct, 6"
Connection: 85 CFM Minimum
System status output:
Connector
3-Pin mic jack
Dry contact pins: 1 (NC), 2(NC), 3 (COM)
Maximum amps: 2A at 24 VAC
Tool interlock:
(4) Connectors
2-Pin mic jack
(4) Dry contact pins: 1 (NC), 2(COM)
Maximum amps: 2A at 24 VAC
Remote indication: 37-Pin amphenol connector, 100"
Nitrogen:
Pressure: 85 ± 15 psi
3/8" Regulated / constant stainless compression filtered to 5µ
Required draw/Flow: 200 SLM system flow requirement
Clean Dry Air (CDA):
Pressure: 90 ± 10 psi
1/2" Stainless compression constant, regulated
Required draw/Flow: 300 SLM System flow requirement
Relative humidity: ≤ 10%
Water fresh < 100 mg/liter of hardness:
Pressure: 60 ± 15 psi
1/2" FNPT Constant, regulated filtered to 100µ
Required draw/Flow: 0.75 GPM
Cooling water return:
FNPT, 1"
Required draw/Flow
Cooling water supply:
Pressure: 40 ± 20 psi
FNPT, 1"
Required draw/Flow: 10 GPM at 50°F ± 10°F
IW Drain:
Pressure: Sump pumped
FNPT, 1/2"
Required draw/Flow: TE-5 20 GPM, TE-7 GPM
Drain / Drip tray:
Pressure: gravity
Connection: 1" FNPT
Thermal properties with recirculation / Sump pump:
Media: Cabinet exhaust
BTUs/Hour: 771
Calculated using: 85 cfm
Media: City water
BTUs/Hour: 3375
Calculated using: 0.75 gpm
Media: CDO Exhaust
BTUs/Hour: 102
Calculated using: 20 cfm
Media: Electrical drawer
BTUs/Hour: 335
Calculated using: 35 cfm
Temperature: 25°C ± 5°C
Humidity: < 70%
Power supply: 208/220VAC, 110VAC, Single phase, 50/60Hz, 40A, 4-wire.
DELATECH 859 is a state-of-the-art facility equipment designed for efficient work flow, layout and usability. It comes with an ergonomic design, featuring an intuitive user interface that makes it easy to use with minimal instruction. 859 features high-end features such as a high-speed fan-assisted cooling unit, a stainless steel construction, a multi-function power switch, professional control functions, and much more. DELATECH 859 is built to last, offering superior durability and reliability. Its stainless steel construction ensures optimal structural strength and corrosion resistance, while its fan-assisted cooling system keeps the unit running smoothly, even in the most demanding working environments. Its multi-function power switch offers a variety of options for powering up and cooling down the unit, and professional controls allow for precise temperature control. Furthermore, 859 has been tested according to UL, CSA and ETL/Intertek standards, ensuring you can trust its long-term quality and performance. DELATECH 859 is perfect for a variety of needs, offering high value with low operating costs. It is energy efficient, helping to keep your energy bills low while reducing your carbon footprint. In addition, its advanced air circulating fan creates a consistent temperature within the facility, eliminating hot or cold spots and preventing the spread of harmful bacteria. This means a healthier working environment and better working conditions for staff. 859 boasts a range of features and benefits that make it a great choice for any facility. These include a large interior space for easy storage and organization, as well as an adjustable shelf rack that is compatible with all accessories from DELATECH range. The unit is also equipped with informative LCD displays, giving staff a clear view of the unit's functioning status. The LCD temperature displays make it easy to keep track of temperature settings and for staff to adjust the operation of the unit accordingly. DELATECH 859 facility equipment is the perfect choice for any business. It is easy to use and maintain, ensures safety, and offers consistent high performance, helping to ensure the efficient running of your business. With its advanced features, quality construction, and energy efficiency, 859 is an outstanding choice when it comes to facility equipment.
There are no reviews yet