Used TEMPTRONIC TPO 4300A-8C32-4 #9196221 for sale
URL successfully copied!
Tap to zoom
ID: 9196221
Vintage: 2007
Temperature source system
RS232, IEEE, 10/100 Ethernet interface
Temperature range:
Standard head with arm or 2.4 m (8 ft) hose:
-80° to +225°C (60 Hz system)
-75° to +225°C (50 Hz system)³
Standard head, no arm with 1.2 m (4 ft) hose:
-80° to +225°C (60 Hz system)
-75° to +225°C (50 Hz system)³
Typical temperature transition rate (air):
-55° to + 125°C: Approx. <5 seconds²
125° to -55°C: Approx. <13 seconds²
System air flow output: 2.4 l/s to 9 l/s (5 to 18 scfm)
Temperature accuracy: 1.0°C (When calibrated against NIST transfer standard)
Temperature set, display and resolution: ± 0.1
Temperature Control:
DUT Sensor ports:
Internal diode
Type T
Type K thermocouple
100 ohm Platinum RTD
DUT Control: Control to within ± 0.1° C
Remote interface ports:
IEEE-488,
RS232C Serial
Start test/end of test/stop on
First Fail (ST/ET/SFF)
Ethernet
Features:
(2) Modes of operation:
Operator mode
Cycling mode
Purge flow capacity:
0.25 to 1.5 liters per second (0.5 to 3 scfm) airflow
Manually adjustable
Thermal head raising and lowering:
Pneumatic control on thermal head
Operated manually or via remote interface
Head positioner movement:
Manual locking (4 locks)
360° Head rotation
Manipulator (arm) movement:
Motorized raising and lowering of arm
330° Positioning range around the base unit
Environmental and service features:
Over temperature protection: + 235°C (Factory-set)
Mobility:
(4) Swivel caster wheels with locks (10.16 cm (4-inch) diameter)
Rear handle for ease of transport
Refrigerants:
50 Hz systems: HCFC-free and CFC-free, non-toxic, non-flammable
60 Hz systems: CFC-free, non-toxic, non-flammable
Noise level: <65 dBA approximately
Facility requirements:
Power requirements:
200-240 VAC (230V nominal)
50 Hz, 30 Amp, 1 Phase
200-240 VAC (230V nominal)
60 Hz, 30 Amp, 1 Phase
Compressed air requirements:
Clean, dry air:
Filtered to 5 micron particulate contamination
Oil content: <0.01 ppm by weight filtered to .01 micron oil contaminant
Dewpoint: <10°C @ 6.2 BAR (90PSI)
Supply pressure: 6.2 to 7.6 BAR (90 to 110 PSIG)
Supply flow at minimum: 7.2 l/s to 14.3 l/s (9 to 30 scfm)
Supply pressure: Nominal 25 scfm
Air supply temperature: +20° to +25°C (+22°C nominal)
Operating temperature: +20° to +28°C (+23°C nominal)
Humidity: 0 to 60% (45% nominal)
2007 vintage.
TEMPTRONIC TPO 4300A-8C32-4 is one of the best and most reliable final test systems available. It comes with a 4-slot Data Acquisition Module (DAM) and 8-Channel Temperature Test Equipment that make it a highly efficient and powerful system. TEMPTRONIC TPO4300A-8C32-4 Unit has a rugged aluminum chassis and a temperature range of +25°C to +85°C. This test machine is designed for optimal performance for final test applications. The 8-Channel Tester Tool in TPO 4300A-8C32-4 enables simultaneous tests of up to 8 components. It has an integrated voltage regulator that allows for static tests to be completed quickly and accurately. TPO4300A-8C32-4 has powerful performance-driven features for optimal process and productivity. To ensure accurate measurements, the unit features an 8-channel Tester Asset for dual-zone thermal profiling, a Special Process Timer, and a data acquisition module. This helps identify temperature drift rates and provides temperature stability control. The Labview Software provides an open platform to quickly develop complete test solutions. It includes an interactive graphical program that allows users to rapidly develop customizable test plans. The software also integrates model diagnostics and Documentation tools. Additionally, the software includes an intuitive diagnostics package to easily navigate and identify potential test issues. TEMPTRONIC TPO 4300A-8C32-4 also has an integrated digital storage oscilloscope. This allows for the capture of waveforms up to 50MHz, with a maximum sample rate of 10MS/s. Additionally, it can measure current, voltage, and temperature. TEMPTRONIC TPO4300A-8C32-4 unit's communication capabilities include Ethernet, USB, GPIB, and RS232 inputs. The Ethernet connection enables remote monitoring of motions, temperatures, and equipment alerts. The USB connection enables the user to transfer data directly from the Tattered to a PC, while the Gpib connection allows for integration with the GPIB bus. The RS232 connection is used for communications between TEMPTRONIC and external devices. TPO 4300A-8C32-4 is also designed for maximum durability and is backed by a 2 year warranty. This system is an ideal solution for high-accuracy final testing and thermal profiling applications. It can be used in industries such as Telecommunications, Automotive, and Electronics. With its robust hardware and advanced soft- ware, TPO4300A-8C32-4 is one of the best final test systems available.
There are no reviews yet