Used MICROZONE FPH-2-6 #9035810 for sale

A MICROZONE FPH-2-6 laminar flow and fume hood is a sophisticated laboratory equipment designed to increase safety for laboratory personnel and to protect the environment from contaminated, hazardous or volatile chemical substances. The hood consists of two major components - a blower/motor assembly and a filter-enclosed section. The blower/motor assembly provides a laminar air flow by inducing air from the room into the filter-enclosed section to create a highly uniform flow. This section is connected to the external environment and is located at the lower end of the hood where the inlet and exhaust systems are connected. The air is then drawn downwards along the length of the hood to allow for optimal capture of airborne particles. The filter-enclosed section houses a high-efficiency particulate air (HEPA) filter which captures hazardous particles. The HEPA filter is designed to capture particles of up to 0.3 microns in size. This is critical as larger particles will likely be visible on the outside of the hood where they can potentially contaminate the environment. The filter-enclosed section also houses a counter-flow charcoal filter designed to capture and neutralize volatile compounds. FPH-2-6 laminar flow and fume hood is designed to meet all applicable safety standards. The hood is compliant with ISO 14644 -3 class 5 requirements for Clean Room Classification, meaning it can be used for the storage and manipulation of toxic substances. Additionally, the hood is certified with UL 60950-1 for safety and NRTL on the Blower/Motor Assembly. Finally, MICROZONE FPH-2-6 is designed with a number of features to minimize its environmental impact. These features include low noise levels, energy saving LED lighting, and an intelligent control system that automatically adjusts the energy consumption according to the user's needs. Additionally, the hood is designed to reduce the amount of air leakage through the use of leak-proof seals and gap-free construction. In conclusion, FPH-2-6 laminar flow and fume hood is a safe, reliable, and eco-friendly laboratory equipment designed to provide maximum safety for laboratory personnel and protection for the environment from hazardous substances. The high quality materials and design of this hood guarantee long lasting performance and a high level of safety.