Used CLAUSING KONDIA FV1-48VS08 #137614 for sale
URL successfully copied!
ID: 137614
Vintage: 1990
Vertical mill, 9" x 48"
Specifications:
Table
Size: 9" x 48"
Number of t-slots: 3
Width of t-slots: 5/8"
Center distance of t-slots: 2-9/16"
Traverses:
Longitudinal travel (x-axis): 36"
Saddle travel (y-axis): 15"
Knee travel: 16-1/2"
Ram travel: 23"
Throat distance: 6-5/8" to 29-11/16"
Turret head:
Spindle motor: vs, 3 hp, 3 ph, ac, 60 hz
Spindle speeds: 60-4,000 rpm
Spindle taper: r-8
Spindle to table distance: 0 - 18-5/16"
Quill travel (z-axis): 5"
Quill feed per spindle rev.: .0015" - .003" - .0047"
Quill diameter: 3-3/8"
Electrics: 220 volt, 3 ph, 60 cyc, 3 hp
Features:
3 hp ac motor
Infinitely variable speed drive
Overload safety device integrated with motor
Articulating head arrangement for machining compound angles
Worm gear angular position of head in two directions
Lever-operated manual rapid quill movement
Handwheel for fine quill feed
Chrome-plated precision ground quill and quill lock
Adjustable auto. Feed disengagement for quill feed in both directions
Micrometer depth stop
Reversible switch for clockwise or counterclockwise operation
R-8 spindle
Abec class 7 spindle bearings
Spindle brake
Constructed of meehanite casting for superior rigidity & wear resistance
Precision ground leadscrews
One-shot lubrication
Equipped with:
Power draw bar
1990 vintage.
CLAUSING KONDIA FV1-48VS08 is a heavy duty knee mill designed for precise and accurate operation. The machine has a robust construction using one-piece Meehanite cast iron with ribbed box construction and steel reinforcing in the box areas. The hand scrapped ways provide substantial support and stability. The knee design is optimized for rigidity and accuracy with a column offset that allows greater access to the table surface and the spindle center line. The generous table length and width give plenty of working room, while the large range of standard features provide a wide range of operation capabilities. The spindle has a 48 inch range of travel and a 7.5 horsepower motor capable of speeds up to 4500 RPM. The standard quill-feed handle and adjustable power-feed drawer give lateral and longitudinal repeating positional label and ample operator control. The KONDIA FV1-48VS08 also has a two-axis DRO that gives precise positioning control. The KONDIA CLAUSING KONDIA FV1-48VS08 has a large working table with a weight capacity of 1400 lbs and a travel of 10" x 60" in both X and Y axes. The mill has an adjustable gib and is equipped with hardened and ground slideways driven from a reversing AC servomotor to ensure accuracy and ease of operation. One of the key features is the way that the quill is supported in all directions from the Y-axis saddle, eliminating backlash and vibration. The mill also has Caramazy fittings for tooling to ensure exact repeatability and accuracy. The KONDIA FV1-48VS08 is designed for heavy machining operations such as keyways, fluting, reaming, bore drilling and much more. It is equipped with an adjustable spindle speed capable of producing the desired finish and productivity. The standard features of the KONDIA CLAUSING KONDIA FV1-48VS08 make it an ideal choice for a wide range of applications, from general fabrication duties, to more specialized machining operations. The KONDIA FV1-48VS08 is a heavy mill that has been designed for precision, accuracy and ease of operation. Equipped with a powerful 7.5 hp motor and hardened and ground slideways driven from a reversing AC servomotor, the KONDIA will provide consistent high quality production output. The machine also has Caramazy fitting for tooling and a two axis DRO for precise positioning. With its large working area and adjustable gibs, the KONDIA CLAUSING KONDIA FV1-48VS08 is a fine choice for any high volume machining application.
There are no reviews yet