Used HETRAN WS-15 #158783 for sale

Name: HETRAN WS-15
Brand: HETRAN
SKU: 158783
Availability: InStock

URL successfully copied!

Machine Tools

Manufacturer

HETRAN

Model

WS-15

ID: 158783

Vintage: 1993

Coil-to-Coil Rod and Wire Peeling/Shaving Line Specifications: Working Range Finish Diameter: 0.5" – 1.5" Wire Throughfeed Speed: Up To 150' / Min. Diameter Tolerance:-0" / +0.003" Removal in Diameter: 0.012" – 0.080" Motor: 100 HP DC 440V 3/60 Line Consists of the Following Components: 5000 Lb. Horizontal Pay-Off Reel w/ (1) Set of Infeed Rolls (3) 7-Roll Straightening Sections ((2) Horizontal and (1) Vertical) All Rolls Driver (1) 4-Roll Infeed Unit, Hydraulically Driven Shaving Head Mounted on Rod Shaver Spindle Driven Through Infinitely-Variable SCR-Controlled 100 HP Motor Spindle Runs on Super-Precision Angular Contact Bearings and Carries the Shaving Head Self-Centering Material Entry and Exit Guide Assemblies in Front and Back (1) 4-Toolholder Shaving Head Precision Set-Up Fixture to Pre-Set Toolholders Tool Wear Compensation Device (2) 4-Roll Pinch Roll Units, Air-Actuated Items #2 - #5 are Mounted on a Common Steel-Frame Base. Steel Chips Drop Directly onto Chip Conveyor. The Machine Base is Also Used for Recirculating Coolant Reservoir (1) Chip Conveyor w/ (1) High-Pressure Coolant Pump (3) Belt Polishers, Model BP-2 Working Diameter Range: 0.5" – 1.5" Wire Throughfeed Speed: Up To 150' / Min. Abrasive Belt Size: 8" Wide x 60" Length Motors: 15 HP AC 460V Each Belt Polisher Consists of (1) Polishing Head Assembly w/ (3) Rollers ((1) Idle, (1) Tracking and (1) Drive Roll). A Horizontal Pinch Roll Unit is Mounted on Exit End of Each Polisher Housing. (1) Filtering System (1) Horizontal Straightener Section11. (1) Tension-Free Recoiler Unit 4-Aluminum Roll Feed-Out Unit and 3-Roll Recoiler, Hydraulically Driven Double Carousel Stand (1) Hydraulic Power Unit All Input Electrics are 460V. All Operating Electrics are 110V (1) Pendulum-Mounted Operator's Control Panel Floor Space Required (Approx.): 55' x 23' 1993 vintage.

Read More Close

HETRAN WS-15 is a multi-function machine tool produced by HETRAN Tool Company. It is designed for a variety of industrial uses and is capable of milling, drilling, turning, and grinding operations. WS-15 is fitted with a robust, heavy-duty spindle manufactured using the latest technology. It features a full range of both vertical and horizontal spindle configurations and is capable of achieving high-speed machining. The spindle has a maximum speed rating of 15,000rpm and a maximum torque rating of 29 Nm. The spindle is driven by an upgraded series 1500 AC motor. HETRAN WS-15 is fitted with a full table guard to comply with safety regulations and also features a specially designed chip break-out system to reduce noise and dust emissions. WS-15 has a 1200mm x 600mm table featuring a robust inverted hardened V-shaped prism. This table design allows for a wide variety of operations including the machining of deep slots and pockets, as well as angled or curvilinear parts. The table can also be loaded with either round or flat parts. The load capacity of the table is up to 700 kg. HETRAN WS-15 is equipped with a range of accessories including a set of tool holders, a milling head and a power supply unit. The tool holders are designed to satisfy various cutting requirements, and have a choice of Morse taper #4, #2 and 5/8", as well as a drill chuck capacity of 3/32" - 11/16". The milling head comes with two speed settings, (1000 - 4500 RPM) allowing for varying size cutters, while the adjustable power supply unit provides the necessary power control. WS-15 features a comprehensive safety system. It is equipped with overload and over-speed protection systems, as well as emergency stop and emergency off buttons, allowing for safe and controlled operations. The machine comes with a year's parts warranty and lifetime technical and engineering services at no extra cost. Overall, HETRAN WS-15 is an efficient and reliable machining solution for various industrial applications. It is designed for precision, durability, and speed to ensure smooth and safe operations. With its full range of functions and accessories, WS-15 is an ideal choice for demanding machining tasks.