Used MORI SEIKI NL2500MC/1250 #9139832 for sale
URL successfully copied!
Tap to zoom
ID: 9139832
Vintage: 2006
CNC lathe machine
Capacity:
Swing over bed: 36.4" - interference with front cover 26.8"
Swing over cross slide: 29.7
Max. turning diameter: 14"
Standard turning diameter: 10.8"
Max. turning length: 51.1
Travel:
X-axis travel: 10.2"
Z-axis travel: 53"
Spindle:
Max. spindle speed min-1: 4000
Type of spindle nose: jis a2-8
Through spindle hole diameter: 3.6"
Min. spindle indexing angle: .001"
Spindle bearing inner diameter: 5.5"
Turret:
Number of tool stations: 12
Shank height for square tool: 1"
Shank diameter for boring bar: 2"
Tool shank diameter for rotary tool: 1"
Turret indexing time (seconds): 25
Max. rotary tool spindle speed min-1: 6000
Feed rate:
Rapid traverse rate (ipm):
X, Z: 30,000 (1,181.1)
Y: 10,000 (393.7)
Tail stock: 7,000 (275.6)
C: 400 min-1
Tail stock:
Tail stock travel: 50.6"
Tail stock spindle diameter: 4.3"
Taper hole of tail stock spindle: Live center
Motor
Spindle drive motor hp (25 %ed/50 %ed/cont): 24.7/ 24.7/ 20
Rotary tool spindle drive motor hp (3 min/5 min/cont): 7.5/ 7.5/ 5
Feed motor hp: x, y, z: 4.7
Power sources
Electrical power supply kva: 37
Equipped with:
Full c axis
(3) Rotary tools
Fully integrated hydraulic steady rest
Chip conveyor
Centers long bed machine: 50"
Very clean low hours
2006 vintage.
MORI SEIKI NL2500MC/1250 is a multi-tasking machine tool with a twin spindle and a twin turrett. It has two spindles, one main spindle and one sub spindle that can be programmed independently. Each spindle is supported by a 12.5hp motor with a maximum speed of 10,000 RPM. The main spindle and sub spindle have a swing diameter of 18.1 and 13.78 respectively. The main spindle is equipped with a C-axis and a Y-axis, while the sub spindle is equipped with a B-axis. MORI SEIKI NL2500MC/1250 is a highly versatile machine tool that is primarily used for milling, drilling, tapping, and facing operations. It features a 50 tool magazine that can store both main and sub spindle tools. It features a MAXR programmable spindle for both main and sub spindles, allowing for rapid tool change and high precision machining. MORI SEIKI NL2500MC/1250 supports three-axis control. The X-axis is supported with a direct driven linear motor for high speed operation and a 61.02 inch travel range. The Y and Z-axis are supported with a 30 horsepower direct drive motor and a travel range of 25.59 and 19.68 inches respectively. It features an NC rotary table for increased flexibility and with a 100 mm pitch and a max speed of 3000 RPM. MORI SEIKI NL2500MC/1250 features a high level of control in a compact size. It is designed for precision machining, and features the most advanced technological advancements. With an accuray of 0.0002 inches and a positioning speed of up to 393 inch/minute, it is designed to complete even the most demanding tasks. It also supports a CELOS control equipment which provides comprehensive machining parameters in an easy to access user interface. In addition, MORI SEIKI NL2500MC/1250 has a number of safety features. It features a built-in flood coolant system, an automatic power-off unit, and an anti-vibration monitoring machine to ensure the machine performs to its highest standards. It also has Limit Switches and original components to protect the machine against overloads and/or sudden force. With its cutting edge design, MORI SEIKI NL2500MC/1250 is a powerful and reliable machine tool.
There are no reviews yet