Used MICRO VU H14 #9004110 for sale

MICRO VU H14 is an optical comparator, part of MICRO VU family of optical comparators produced by Mitutoyo Corporation. It is a highly precise, high-performance inspection device used to measure and analyze the shapes of parts and ideally suited to a variety of measurements, including angle, roundness and parallelism. MICRO VU H-14 is designed for high accuracy, with a repeatability of ±1 μm, a minimum resolution of 0.5 μm, and a measuring range of ±3 mm. The device also features a maximum input of 3.5 kg, with optional accessories and an optional data collection unit to further increase accuracy. H 14 utilizes a CCD camera and an Optics Head. The CCD camera scans the surface of the object being measured, and the Optics Head contains two pieces of optics—the objective lens and the eyepiece—which magnify the image from the CCD camera. This magnified image is then projected onto MICRO VU H 14's display, allowing for precise measurements. The Optics Head also features a calibrated scale for precise measurement without the need for additional hardware. H14 is capable of both two-dimensional and three-dimensional measurements. For two-dimensional measurements, H-14 utilizes three equivalent CCDs, allowing for simultaneous profiling in both X- and Y-axis directions. For three-dimensional measurements, MICRO VU H14 utilizes a single CCD camera to measure a full profile of the part, with a maximum resolution of 0.5 μm. Additional features of MICRO VU H-14 include the ability to perform measurements while the part is in motion, a Quick Hard Stop mechanism to quickly move the Optics Head to the desired location, a Horizontal/Vertical Adjustment System to optimize the measuring conditions, and a 12-bit Fine Movement System to provide a maximum resolution of 0.05 μm. H 14 comes with a variety of accessories, including lenses, filters, light sources, and XY/XZ stages. These accessories, as well as optional data collection and data analysis software, make MICRO VU H 14 an ideal device for measuring, monitoring, and evaluating all types of parts.