Used ASM MC 609H #9183583 for sale

ASM Micro Control 609H is a heated oven/furnace designed for applications such as curing, soldering, annealing, heat treating, bonding, and vitrification. These ovens and furnaces are reliable and provide precise temperature control due to their advanced microprocessor based temperature control system. ASM Micro Control 609H has a temperature range from 150 to 1000 degrees Celsius with a 0.1 degree resolution. It has a large interior capacity for treating large parts, up to 200 liters (7 cubic feet). The oven has a fast heating rate of 2 to 3 degrees per minute and is capable of reaching full power in less than 10 minutes, allowing for more rapid curing of parts. The temperature uniformity is guaranteed to be within 5.5 degrees Celsius of the set temperature. The oven features an all stainless steel interior with a 3-inch, insulated walls, and has no combustible insulation in the cavity. It also has an over-temperature safety system and an emergency shut-off switch. The microprocessor temperature controller provides accurate temperature setting and monitoring, along with a built-in timer and alarms. In addition, the controller features an easy-to-read LCD display. For convenience and safety, ASM Micro Control 609H has a keypad lock to prevent unauthorized use and tampering of the temperature settings. It also has a built-in safety switch that will shut off the power to the oven when the door is opened. This oven/furnace is suitable for a variety of industrial applications such as electronic parts manufacturing, plastics molding, and jewelry casting. It is UL 844 approved for low voltage applications and is designed with a load capacity of 4.2KW. It runs on 120/208 or 240/480V and is designed for direct electrical connection to the power supply. The oven also features an integrated EMI filter to reduce electromagnetic interference. ASM Micro Control 609H oven/furnace is a reliable and efficient heating solution for any industrial application. Its easy to use interface and precise temperature control make it an ideal choice for curing, soldering, annealing, heat treating, bonding and vitrification.