Used BLUE M CC-13-C-P-B #293628584 for sale

BLUE M CC-13-C-P-B is an oven and furnace built with heavy cast iron housing and consists of a 4-inch thick mica insulation, with a continuous rated temperature of up to 1200°F. The furnace is mounted on four heavy duty metal angle brackets to assure stability, and there is an integral steel frame that helps protect and secure the mica fiber insulation. The maximum working temperature is between 900°F and 1050°F. CC-13-C-P-B is a single set point furnace, with safety controls and a heating element of 450W. It is equipped with over-temperature protection, adjustable over-temperature alarm and adjustable time shutdown alarm. The unit is also supplied with a built-in power voltage controller to reduce temperature cycling. The heating element is a four-wire resistance-based heater system covered with high temperature mineral insulated cable for consistent and reliable performance. This element is designed for use as an in-line heater, as it is not subjected to direct flame or heat. BLUE M CC-13-C-P-B has a continuous duty rating of 5.25 KVA and has a double wall design to provide extra protection and efficiency. It also has a safety switch to shut off the power supply should the temperature exceed 1200°F. The unit is designed for easy installation and is pre-wired for quick connection to an electrical outlet. The furnace is equipped with circulating fans during heat-up and cool-down to ensure proper circulation of air throughout the cabinet. The chamber is cooled by forced air convection and includes adjustable vents in the chamber which open and close as needed depending on the application used. Additionally, this oven/furnace is designed with a vent hood that directs any generated gases or fumes away from the operator's breathing zone. It is also UL-Listed and CSA-Certified so it is a safe option for industrial use. CC-13-C-P-B oven/furnace is ideal for applications requiring high temperatures and precise controls, such as annealing, hardening, tempering, brazing, drying, and the curing of materials. It is also suitable for the production of steel molds, shaping of plastic parts and other industrial processes.