Used MANNCORP C350 #9169181 for sale
It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.
Tap to zoom
Sold
ID: 9169181
Vintage: 2012
Wave solder machine
PCB Dimension:
Width: 50-350 mm
Length: 75 mm
Thickness: 1.0-2.0 mm
Edge of carried: 3.0 mm
Parts height: 60 mm
Height of parts lead: 6 mm
Conveyor: Max. 2.0 M / min.(60 Hz)
Conveyor speed: Max. 1.6 M / min.(50 Hz)
Fixed of rail:
Inlet: 780 mm
Outlet: 1,020 mm (at 6°)
Conveyor height:
Inlet: 855 mm
Outlet: 975 mm (at 3°)
Direction:
Standard: Left in right out
Option: Right in left out
Conveyor angle: Set up 4.5° (3-6°adjustable)
Angle adjustment: By hand wheel located inlet and outlet
Vents (Exclude motor):
Dimensions: Φ150 mm x H 60 mm
Flow rate: Min.12 m³ / min
Inlet rail:
Method: Rail
Length: 350 mm
Edge of carry: 3.0 mm
Power: Manual
Foaming fluxer:
Air pressure: 0.5-1.0 kg / cm²
Foaming control: By regulator and speed controller
Foam height: Max.10 mm
Nozzle width: 25 mm
Pre-heater:
Consumption: 1.7 kW x 3-5.1 kW
Heater: Stainless sheathe heater with fin
Sensor: Pt100, 3 Wires
Zone (L: 600 mm)
Method of temp.control: PID + SSR
Hood: Stainless steel
Solder pot:
Material of bath: Cast iron
Wave: Single wave
Consumption: 7.8 kW I.3 kW x 6
Wave motor: 90 W
Capacity: ~165 kg (Lead free)
Method of temp. control: PID + SSR
Sensor: Pt100, 3 Wires
Heating: Indirect
Working temperature: 300°C (Max.)
Conveyor:
Finger: Engineering plastic L type (Std)
Rail: A1 Alloy, surface hardening
Width adjust: Ball screw
Motor: 60 W
Power: No fuse breaker (3 Phase, 50 A)
Main power switch: 3Φ, AC220 V ± 10%, 50/60 Hz
2012 vintage.
MANNCORP C350 is an oven or furnace used to heat or temper different materials. It has a temperature range of 250°F to 2000°F and is built to support both batch and continuous operation. C350 is designed with a heater power output of 350kW, divided across three banks of quartz heaters that produce precise temperature control throughout the entire chamber. This oven has a solid steel chamber and heat shield construction that ensures maximum uniformity of temperature throughout the entire volume. The chamber can be tilted to facilitate movement of objects or material within. The air inside the chamber is circulated by a powerful blower motor. MANNCORP C350 is designed with advanced control systems that allow for precise and consistent programming of the temperature. The unit comes with MANNCORP PC400 controller which provides quick and easy data entry as well as full process control and material handling capabilities. The PC400 also offers automatic alarms to alert the operator if any safety issues are encountered. This oven is fitted with door locks, exhaust ports, and thermocouples to ensure safe operation. It's also designed with easy to use digital displays and clear status information for easy use and monitoring. C350 is designed with features that ensure compliance with safety regulations. It is UL listed and features a built-in ground fault circuit interrupter to protect against shocks from ground current. MANNCORP C350 also utilizes a flame safeguard control system to maintain the safety of the heater. Additionally, the oven can be operated with a wide range of gas types, from natural to propane, for greater flexibility in operations. C350 is an effective oven or furnace due to its dependable performance, convenient features, and precise temperature control. With a maximum temperature of 2000°F and its comprehensive control panel, this unit is built to quickly and efficiently heat or temper different materials. It's UL listed design and safety features allow for the safe and compliant operation of this oven.
There are no reviews yet