Used RTC / RADIANT TECHNOLOGY TF-610 #9018533 for sale

RTC / RADIANT TECHNOLOGY TF-610 is a Heat Treating Oven/Furnace that uses a combination of gas and electric heating techniques applied to a single chamber to provide uniform heat treat cycles. RTC TF-610 can be used in a single or dual chamber configuration and runs on natural or propane gas. It is capable of heating to 2000°F (1093°C) and utilizes recirculated pre-heated air for uniformity and cost-efficiency. The outer chamber of RADIANT TECHNOLOGY TF-610 is insulated with mineral wool and sealed with a pivoting three-point closure equipment. It also has ventable doors and safety release valves designed to provide operator protection and peace of mind. The interior chamber is lined with high-temperature ceramic insulation designed for high-temperature use and is resistant to temperatures up to 2300°F (1260°C). The control panel on TF-610 is designed for easy operation and features a safety limit switch protection system, PID (proportional integral derivative) temperature controller, and a digital readout thermocouple control. The PID temperature controller is able to detect and adjust the temperature at a given time and the digital readout thermocouple allows the operator to monitor the temperature at any time. Control of the furnace is achieved through a temperature programmer and data logger, which can be used to store and recall heat treat cycles. The programmer is designed to provide optimal temperatures for heat treating a variety of metal parts. The data logger stores all of the process information, allowing operators to track the history of the heat treating cycle. RTC / RADIANT TECHNOLOGY TF-610 also utilizes a combustion unit designed to work with natural or propane gas. The combustion machine is very efficient and reduces maintenance and emissions while operating. It also features a variable speed blower tool to control the airflow, providing precise control over the heat treat cycle. In conclusion, RTC TF-610 is a highly efficient and reliable heat treating oven/furnace. It is designed for maximum performance, safety, and ease of use. The combination of gas and electric heating, temperature programming, data logging, and a combustion asset make it an ideal choice for the heat treating of metals.