Used CAMTEK Falcon 620 #9090581 for sale
It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.
Tap to zoom
Sold
ID: 9090581
Inspection system, 4"-8"
Power: 220 V, 1 phase, 16 A
Vibration isolation: Comply
Proper class: 100
General:
Wafer thickness: > 250 um - less application pending
Chip size: all possible
Max die count per raw: all possible
Lens maker (2D/3D): Mitutoyo
Wafer handling (robot system): IDE, ISEL
Warpage wafer capability: up to 500 microns for 8" wafer
System OS: Windows XP Pro SP2
Image storage capacity (hard disk): 120Gb or higher (On/Offline)
Control PC: Athlon 2.8 dual processor or dual core
Monitor size: 19"
Reference die: golden die (cleaned with multiple dice)
Map integration: OK
Raw data review:
Comply (Excel format can be modified by user)
Includes defect position and algorithm kinds
2D performance:
Detection: foreign material, particles, scratches, embedded, discoloration, not open
Repeat-ability: > 97% (contrast 25GL and above)
2D pattern: visual
Scan resolution (lateral): 1.8 - 9 um
Review resolution: x10 (0.6 um)
Min 2D defect: 3.6 um (x5 mag, 1.8 um application pending)
Throughput (doc) for 6" (2D): 12 WPH (1.8 um resolution)
Critical dimension measurement:
Gold bumps and bond pad XY size: shape and positioning violation
Accuracy: 1.5 optical pixels (test using built in target)
Repeat-ability (sigma): 1 optical pixel (test using built in target)
Solder bumps diameter: diameter and positioning violation
Accuracy: 1.5 optical pixels (test using built in target)
Repeat-ability (sigma): 1 optical pixel (test using built in target)
3D performance:
3D height: bump height, die co-planarity
3D inspection tool: Confocal Chromatic Sensor (CCS)
CCS bump height accuracy: +/- 1 um (on target)
CCS bump height repeat-ability: 2.0 um at 1 sigma (on target)
CCS height measurement range: 1000 um
CCS scan resolution (vertical): 0.1 um
Main system:
Main body:
Optical Unit
Stage unit
Anti-vibration unit
Controller unit
Cleanroom unit
Loading / unloading part:
IDE robot
Loadport (2 configurable up to 8")
General configuration:
System control: Windows XP Professional
Wafer type: flat and notch - no glass (transparent)
Wafer thickness: 250 um - 800 um
Cassette stage: independent 2-cassette stage, open cassette type
Airborne particle: Class 100
Anti vibration: comply of low band noise
AC power connection type: 230V, 50/60Hz
System controller:
Main PC:
Main memory: 2Gb
Hard disk drive: 120Gb
DVD-RW
MCU (Main Computer Unit): 4 PC or 1 Dual core PC
- each PC contains dual image processor
Display: 19" TFT LCD
CCS control unit
Stage configuration:
Stage: better than 5um flatness
Wafer present sensor: vacuum sensor
Motion control configuration:
Linear motor
Stage position accuracy: less than 5 um
Position repeat-ability : less than 1 um
Stage speed: > 5 um/sec
W/F handling configuration:
W/F handler: IDE robot system
Transfer reliability: > 50,000 wafers
Cassette absent & present sensor
Wafer ID read function
OCR: Top OCR
Additional functions:
Offline review: OK (real independent offline review)
Data output: map, all bump height, raw metrology result
SPC: OK
OCR: OK (top)
Ionizer: OK (1 in main M/C)
Particle maintenance: 1 HEPA filter in M/C (1 in Main M/C)
Prealigner: OK (ISEL)
3D mapping during review: OK
Overkill tolerance: Less than 5 %(at 25 GL contrast)
2007 vintage.
CAMTEK Falcon 620 is a multi-function PC board assembly and manufacturing equipment designed for high performance and versatility. It features a powerful and reliable 32-bit processor, along with a large 12" active display and 10" touchscreen. It also includes a wide range of features to ensure the efficient production of printed circuit boards (PCB). Falcon 620 is capable of providing accurate and precise manufacturing process control with its advanced PID algorithms and high speed data acquisition, making it ideal for a broad range of PCB assembling requirements. This system is ideally suited for both low and high volume production lines. CAMTEK Falcon 620 has an easy-to-use touchscreen user interface, which includes six different menus for weighing, inspecting, fault locating, handling, and labeling parts and boards. Its advanced password protection unit helps ensure secure access to the different menus. Falcon 620 also offers advanced connectivity to local and remote machinery, allowing customer tailor-made production lines. All the machine data can be conveniently stored using USB or Ethernet connections. For production needs, CAMTEK Falcon 620 provides a comprehensive range of features: automated pick and place systems can be used for component handling; pre-measured fluxing can be used to improve the quality when assembling and soldering components; automatic on-the-fly programming can be used for optimal board programming; and automatic inspection, fault location, and repair can be done with CAMTEK proprietary machine. To ensure quality control and cost-effectiveness, Falcon 620 supports dynamic yield analysis, which tracks production process values and trends to allow tailored process adjustments and improved yields. All the data is stored and can be recalled for further analysis. CAMTEK Falcon 620 also features an optional laser unit for marking boards and components. The laser is equipped with auto-focus and power adjustment capabilities to ensure accurate and high-quality markings. It also supports a range of materials and surfaces, including bare or heat-treated copper, gold and silver. Falcon 620 is an ideal solution for maximizing the efficiency and accuracy of PCB assembly and manufacturing. Its comprehensive and powerful features allow for maximum machine control and production flexibility, while its easy-to-use user interface allows even novice users to get up and running quickly.
There are no reviews yet