Used UNIVERSAL 2596B #147370 for sale
URL successfully copied!
ID: 147370
Axial Lead Component Sequencer
Cycle rate: 25,000 per hour (22,500 with on-line verifier option)
Machine Configuration: Up to 9 dispenser modules constructed in multiples of 20 dispensing stn (200 stns maximum)
Optional jumper wire dispensing heads may be installed at stns 3, 23, 43, 63, and so forth
Optional refire dispensing heads may be installed at all stns, in modules of 20 providing they are contiguous from the first stn
Component Output:
Standard: Class A, 0.200" (5mm) pitch
Options: Class AA, B, C, or 5mm
0.375’" (9.5mm) or 0.400" (10mm) pitch for B and C class output only
Controller:
A series 8220 UICP assembly
UICS software and machine self diagnostics are standard
Standard Service Requirements:
Electrical: 120vAC, 60Hz, single phase, 15 amp
Pneumatic: 5.0 CFM at 70psi (73.6 liters/minimum 4.8bar)
Minimum. Input air quality shall not have particles larger than 5 microns.
UNIVERSAL 2596B is a pc board assembly and manufacturing equipment designed for high-yield, high-accuracy production of printed circuit boards. The fully-automated system can produce up to 60 panels per hour, with a maximum printed circuit board size of 24"x 24". It is capable of producing double-sided and multi-layer boards, and is highly reliable, requiring minimal intervention from operators. The unit is equipped with several components. The placement head is designed for high accuracy placement of components, with an accuracy of 50 microns and a placement speed of 0.06 to 0.3 seconds per component. The board handling machine is made up of two conveyers which move the boards through the tool and then stack them at the end. There is an automated vision asset which checks for surface defects, and a special module for 'repairing' any defects on the boards. The model also includes high precision counters which measure the exact number of parts used, as well as a nitrogen generator which provides a high-pressure, constant flow of nitrogen to help prevent oxidation of the components. The equipment can be controlled through a software program which contains comprehensive simulations of all the system's features. It has a wide variety of intuitive controls, allowing operators to adjust the speed of production, monitor progress, and troubleshoot any problems. The software also includes a number of safety features to ensure the safety of the operators and of the machine. 2596B is a reliable, high-precision tool for producing pc boards. It is an effective solution for high-volume production, and its automated features help reduce the need for operator intervention. Its features and intuitive software make it an ideal choice for production facilities looking to produce pc boards with a high level of accuracy and quality.
There are no reviews yet