Used VERTECH VA722-II #9246242 for sale
URL successfully copied!
ID: 9246242
3D Solder Paste Inspection (SPI) system
PCB Size:
Minimum: 55 x 55 mm
Maximum: 400 x 300 mm
PCB Thickness: 0.6-5.0 mm ≤5.0 kg
PCB Clamping edge clearance: 3 mm
Minimum inspection component: 0402 mm / 01005"
Paste height range: 0-500 um
PCB Clearance:
Top: 10 mm
Bottom: 20 mm
Conveyor height:
900 mm ± 20 mm
SMEMA Compatible
PCB Flow direction: Left to right
Automatic width adjustment mode
Maximum board warp: ≤5 mm
Camera system:
Camera brand and pixel: GERMANY IDS 5.3M Pixel
Imaging resolution: 11.8 um
Resolution accuracy: 0.25 um
Inspection speed: 0.4s / FOV
Repeatability: <1% at 3 Sigma
GB and R: <10% at 6 Sigma
3D Light source: Programmable electronics grating
Illumination: Multi angle light source
Hardware component:
Moving control: X / Y Axes with high precision AC-servo motor
Conveyor mode: Dual lane
Frame structure: Integral casting
(2) LENOVO Computers
LCD: 1920 x 1080
32GB Memory
i7 Eight core GPU
1TB Hard disk
Independent video card
Operating system: Windows 7
64-Bit
Air supply source: 0.35-0.55 mpa
Power supply: AC 200-240 V / 1000 VA, 50/60 Hz, Single phase.
VERTECH VA722-II is a PC board assembly and manufacturing equipment that is specifically designed for the electronics assembly industry. It offers a versatile range of options for board assembly, rework, and inspection. The system is capable of producing high-yield, high-performance, and reliable finished products in either assembled or in-process form. The unit includes three main components: the main PC board, the software, and the fixture. The main PC board is the most important component and consists of the main microprocessor, the FPGA controller with its associated programming, and the required components including the connectors, switches and LEDs. The software controls the functions on the board including flashing of LED indicators, sequencing of the board sequence, programming the board and running self-tests to make sure the board meets certain specifications. This provides a control loop and machine reliability. The fixture is the actual workholding device or platform that holds the main PC board while the other components are mounted. The fixture also provides power to the main board, communicates with the microprocessor, and is used to position the components and check their alignment. This is a critical step as misalignment of the components can cause poor trace layout that can result in a malfunctioning board. The board sequence is programmed into VA722-II in a sequence of steps and each step can be verified. To ensure the quality of the finished product, the components and the overall assembly process are monitored through a series of tests and inspections. The tests include visual inspection and in-circuit testing to identify any defects in the components and/or the assembly. VERTECH VA722-II tool is also capable of rework that includes removing, replacing, and repairing components on an existing board. This is made possible through a smart fixture and the programming process that controls the parameters. VA722-II asset is designed to provide the highest levels of accuracy, precision, and reliability when performing board assembly, rework, and testing. This ensures that the finished product is reliable and cost-effective in the long term. Overall, VERTECH VA722-II is a highly capable PC board assembly and manufacturing model that provides excellent cost effectiveness, reliability, and functionality.
There are no reviews yet