Used ATG / L&M A7 #9202409 for sale

Name: ATG / L&M A7
Brand: ATG / L&M
SKU: 9202409
Availability: SoldOut

It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.

Tap to zoom

Sold

PC Board Test

Manufacturer

ATG / L&M

Model

ID: 9202409

Vintage: 2012

Flying probe testers (8) Test heads Direct linear drives Carbon Z-axis (4) High resolution cameras Kelvin testing: 300 mA Mechanics: Basic unit (8) Probes: (4) Top (4) Bottom UNIVERSAL Shuttle system Clamp and stretch mode for testing flexible and rigid boards Pneumatic clamping function controlled by foot switch Maximum board size (X x Y): 640 mm x 610 mm 125.2" x 24.0" Minimum board size (X x Y): 10 mm x 10 mm/0.4" x 0.4" Test area (XxY): 610 mm x 510 mm / 24.0" x 20.0" Board thickness: Up to 10 mm / 0.4" Smallest pad: 35 µm / 1.4 mil* 50 µm / 2.0 mil Smallest pitch: 100 µm / 4.0 mil Resolution measurement system: ±1 µm / ±0.04 mil Repeatable accuracy: ±4 µm / ± 0.16 mil Soft touch probes / Micro needle probes: 5 g to 15 g 0.3 g to 2.5 g Electronics: Continuity test: 1 Ω to 10 kΩ Isolation test: Up to 25 MΩ (FM) Up to 10 GΩ (ohmic) Micro short detection Test voltage: up to 500 V Camera system: (4) Color cameras: 1024 pixel x 768 pixel Fast optical scanning of top and bottom side Options: (4) Wire measurements Maximum: 300 mA test current 0.25 mΩ to 1 kΩ: ±2 %, min ±0.025 mΩ Kelvin probes: 0.3 g to 2.5 g Smallest pad: 80 µm / 3.2 mil Smallest pitch: 120 µm / 4.8 mil Kelvin probe fine adjustment Embedded components test: R 0.5 Ω to 10 MΩ: ±0.5%, min ±0.5 Ω >10 MΩ to 50 MΩ: +2% C 0.1 pF to 100 µF: ±2 %, min ±0.03 pF L 0.2 µH to 5 mH: ±3%, min ±0.1 µH Diode / Varistor U reverse voltage and U breakdown voltage: Up to 10 V Latest open detection: Latest probes: 1 g to 10 g High current: 1.4 A (1kHz) Enhanced test voltage: Up to 1000 V Data input format: IPC-D-356A Network connection: Ethernet, TCP/IP Compressed air: 8 Bar / 115 psi Temperature: 18°C to 27°C / 66°F to 81°F, ±3K Relative humidity: 40% - 60% Power supply: 3 x 400 V, 50Hz (3 x 208 V, 60 Hz), 1000 VA 2012 vintage.

Read More Close

ATG / L&M A7 PC Board Test Equipment is a multi-functional testing system specifically designed to allow for rapid testing of Printed Circuit Boards (PCBs). This unit utilizes the latest technologies to provide comprehensive and dependable testing of circuit boards used in the production of various electronics. ATG A7 machine provides a high-speed, full-featured, and PC-controlled tool, designed to ensure maximum control. The asset is equipped with an intuitive graphic user interface (GUI), which makes it extremely easy to configure and use. At the heart of L&M A7 model is its testing capabilities. This equipment utilizes a multi-test series to allow for full testing of a given board. The system integrates a robust data processing into the testing procedure, allowing for precise and consistent testing results. It is also capable of running multiple test sequences simultaneously without the need for special hardware. The unit allows users to accurately identify potential defects on the tested board, minimize downtime, and reduce waste. This machine is also capable of testing boards of up to four-layer designs, allowing it to address a variety of designs. A7 tool also offers an extensive range of features that significantly improve the accuracy and efficiency of the testing process. These features include automatic signal scanning, PARACHUTE test routines, an embedded on-board microcontroller, advanced PC programming, and more. In addition, the asset provides an array of optional additional components to increase testing accuracy and efficiency. The model is also fully integrated with LabVIEW software—allowing users to run custom testing programs. It also includes an extensive product library, which provides access to different boards and components. The equipment is readily compatible with all popular open-source PCB design software, making integration quick and easy. ATG / L&M A7 system is designed to work with minimal human intervention, and is capable of providing reliable test data with minimal setup time. It is versatile and dependable, making it the perfect solution for many industrial and commercial PCB testing applications.