Used SEICA Pilot 1 #9200885 for sale
URL successfully copied!
Tap to zoom
ID: 9200885
Flying probe tester
Technical information:
Access above UUT:
(4) Independent topside flying probes with active test heads
For independent X, Y and Z movements (Angled 5°,15°, 5°,15°)
CCO Camera at probe1 for optical alignment and vision tests
Access below UUT:
(8) Fixed bottomside analog in-circuit channels expandable with 1024 analog
512 programmable hybrid channels
Up to 64 Bottomside fixed openfix probes
System capabillies:
Open, expandable architecture (IEEE-488, VXI, Boundary scan)
Air bearings
Brushless motors with integrated encoders for X and Y movements
Linear motors with encoders for Z-movements
Positioning resolution: 5~m (0.2mils) X-Axis, 5~m (0.2mils) V-Axis
Positioning repeatability: ± 3~m (0.12mils)
Test speed: 12-20 test
Test area & UUT characteristic:
Test area: 400mm x 600mm (16" x 2411)
Maximum testable board size: 405mm x 700mm (16" x 27")
Minimum board width: 20mm (0.78")
Maximum PCB thickness: 5mm (0.20")
Edge clearance: 2mm Min. (0.078")
Minimum pad size: 100~m (4mils)
Minimum pad pitch: 300~m (12mils)
Board alignment: Automatic optical alignment
Manual
Air supply:
Compressed air supply: Typical 6 Atm (88.2 PSI)
Air flow: 100 N/l Minimum (600l / min)
Air compressor capacity: 800l/m Minimum
Power supply and consumption:
110V -10%+15% 2500W (or)
230V -10%+15% 2500W.
SEICA Pilot 1 is a PC board test system, designed as a cost-effective solution for smaller production volumes or prototyping. It employs a modular architecture, with both fixed axis and rotary stages that can be freely configured in a broad range of test set-ups. The main components of the system are an industrial PC, a control server, and a safety interface. The core of the system is an industrial PC, located on the board. It runs the PC board test software, providing a powerful user interface for test definition and test execution. The control server handles all of the requests from the GUI, and provides a series of control algorithms which control the set-up of the stages. The safety interface connects the control server to external outputs and ensures that all safety checks are performed before test execution. Pilot 1 has a wide range of features, including high speed programming, quick response times, and tight tolerances in test measurements. It can also be used in a variety of applications, including ICT, functional and in circuit test, and burn-in. It also has a comprehensive database of test criteria, with over 3000 entries covering all types of common components. SEICA Pilot 1 offers flexible configuration options for testing. It allows users to configure the number of test positions, the number of boards to be tested, the type of test, and the speed of the stages. Stages can be selected from fixed axis, rotary, combined rotary, multi-axis linear, or a combination of these. Additionally, a selection of speed limits can be set to suit the application. Pilot 1 is designed to be reliable and easy to operate, making it ideal for a range of larger volume assembly, testing and burn-in applications. It comes with a full set of accessories and software, including user manuals and multimedia tutorials. It is an ideal solution for faster time to market, maximizing production flexibility and cost effectiveness.
There are no reviews yet