Used SEICA Pilot LX #9200893 for sale

Name: SEICA Pilot LX
Brand: SEICA
SKU: 9200893
Availability: InStock

URL successfully copied!

Tap to zoom

PC Board Test

Manufacturer

SEICA

Model

Pilot LX

ID: 9200893

Vintage: 2003

Flying probe tester Access above UUT: (4) Independent topside flying probes with active test heads (2) CCD Cameras Camera 1: Optical alignment and vision tests Camera 2: Debug and real-time probe viewing Access below UUT: (8) Fixed bottom side analog In-circuit channels Expandable with 1024 analog / 512 programmable hybrid channels (64) Bottom side fixed open fix probes System capabilities: Open expandable architecture (IEEE-488, VXI, Boundary Scan) Linear guides with roller-bearing technology Brushless motors with integrated encoders for X and Y movements Stepper motors with encoders for Z-movements Positioning resolution: 2.5 μm (0.1 mils) X-Axis, 2.5 μm (0.1 mils) Y-Axis Positioning repeatability: ± 3 μm (0.12 mils) Test speed: 12-20 test /s Test area & UUT Characteristics: Test area: 610 mm x 610 mm Maximum testable board size: 610 mm x 1016 mm Minimum board width: 34 mm Maximum PCB thickness: 5 mm Edge clearance: 3 mm Maximum component height (top): 45 mm (1.77") Including PCB thickness Maximum component height (bottom): 100 mm (3.9"), 200 mm (7.8") with lowered plate Minimum pad size: 75 μm (2.96 mils) Minimum pad pitch (distance between two test points, center-to-center): 200 μm (7.88 mils) Board alignment: Automatic optical alignment Board loading: Manual Automatic with SMEMA interface: Conveyor direction: L to R, R to L, Programmable Rail length (X): 1680 mm Maximum opening between rails: 610 mm Minimum opening between rails: 34 mm Load / Unload cycle time: 4s to 6s Conveyor speed: 5 to 30 m / min (33 ft / min) Air supply: Compressed air supply: Typical 6 atm (88.2 PSI) Air flow: 1 N/L Minimum (6 L/min) Air compressor capacity: 10 L/m Minimum PC: Intel pentium IV PC Operating system: Windows 2000 / XP Networking card Power supply and consumption: 110 V -10% to +15%, 2500 W / 230 V -10% to +15%, 2500 W 2003 vintage.

Read More Close

SEICA Pilot LX is a highly advanced pc board test equipment designed to test the quality of printed circuit boards. It is capable of performing a wide range of tests, including electrical and thermal tests, mechanical test, optical inspection, and even inspection of board fabrication. The system boasts a powerful integrated vision unit, allowing it to quickly and accurately detect and identify any flaws or potential defects on the board. It also comes with a fully configurable and scalable software suite, allowing the user to customize the testing process to fit their needs. Pilot LX features an intuitive, easy-to-use user interface that allows for quick test setup and execution, as well as the ability to monitor performance in real-time. It also features various connectors, including 16/32-pin universal test connectors and a BNC style connector, for easy testing of boards. The machine also includes an automated board handling tool, allowing for quick and easy test execution. SEICA Pilot LX is equipped with a variety of measurement capabilities, including DC voltage measurements, resistance measurements, low-current measurements, and capacitance measurements. It also has an intuitive report generating asset, allowing the user to store test data and generate reports at any time. Plus, the user can customize parameter settings, such as test time, voltage ranges, number of measurements, and more, for each type of measurement. Pilot LX also offers a modular design, allowing the user to expand the model as needed. It can be connected to various peripheral devices that are capable of communication through Ethernet, USB, and serial ports. This allows for testing of boards of various types, shapes, and sizes. SEICA Pilot LX is also designed to ensure safety, with an emergency stop button and circuit breaker that can shut down the equipment in case of any emergencies. It also compliant with CE safety ratings. Overall, Pilot LX is a highly advanced pc board test system that is easy to use and capable of performing all necessary tests to ensure the quality of printed circuit boards. With its highly configurable software and powerful vision unit, it is the perfect testing solution for any electronics manufacturer.