Used ENI OEM-1250 #293588025 for sale

ENI OEM-1250 is an AC/DC power supply rated at 1250 watts. It has a wide working input voltage range of 90 to 264 Vac, 50 to 400 Hz with an inrush current of 30 amps peak. The AC input surge capability is 2kV. This power supply can provide power with its single DC output of 12 Volts nominal at 104 Amps peak or 5 Volts nominal at 25 Amps peak. It utilizes an active power factor correction (PFC) circuit for providing a high efficiency operation of up to 92% with a 20MHz PFC control circuit for a low cost PFC solution. The enclosure is designed for convection cooling with open holes to the unit's back side located near the output connections to allow for free air circulation. ENI OEM 1250 is designed for corrosion resistance, durable construction, and reliability in harsh industrial environments. IP65 rating is achieved with a front cover that can be snapped on in the field using the appropriate clips. The power supply features an integrated fan tray on the bottom along with a set of built-in mounting holes on each corner for easy installation. OEM-1250 has a wide operating temperature range of 0 to +50°C. The power supply is protected against overvoltage, overcurrent, overtemperature and current limiting. Additionally, the power supply features a remote On/Off control, green power LED indicator and a 100% full load burn-in test. OEM 1250 is designed for use in a wide range of applications including industrial automation, security systems, and communications. A post-protection circuit allows ENI OEM-1250 to provide adequate protection against overvoltage and short circuit. A soft start input is incorporated to limit the current surge during initial start up. The power supply has a low standby power consumption of ≤0.5W and meets power requirements of both the U.S. and European markets. ENI OEM 1250 is UL, TUV, CB and CE approved and carries a three year warranty.