Used ACCRETECH / TSK UF 200SA #9205039 for sale
URL successfully copied!
Tap to zoom
ID: 9205039
Wafer Size: 6"-8"
Prober, 6"-8"
Option: Cold
Boards:
Slot 1: CPU
Slot 4: VGAC
Slot 6: COGNEX
Slot 8: PIO
Slot 10: TTL/GP-IB
Slot 11: 5CH PGEN
Slot 14: CAP Sensor
Slot 16: AVME
Slot 17: LD. IO
Slot 18: LD. PGEN
CPU Board version: 7507A
COGNEX Board version: 8200
Chiller: SCU-500S
External media: FDD & MOD
Manipulator: MHF410
Air: 0.45 MPa
Vacuum: -53K MPa
Voltage: 100 VAC, 1-Phase
Frequency: 50/60 Hz
Wiring configuration: 2-Wire + Ground
Full load amps: 13A
Main breaker rating: 15A
Ampere rating of largest motor load: 1.6A
Interrupt current: 10 kA A.I.C
Hard Disk Drive (HDD)
Floppy disk drive, 3-1/2"
Head stage
Single cassette loaders: (25) Wafers
Manual wafer inspection transfer unit
Dual robotic wafer transport arms
Pre-alignment stage unit
Capacitive non-contact displacement sensor
Advanced wafer alignment unit
Dual more scales (X and Y)
High rigidity Z stage
Color LCD control panel with touch panel
Switches
Alarm lamp pole
Nickel plated: HC-8 Hot and cold chuck and controller (-40°C to 150°C)
Needle-cleaning option-driven disc type: 8" x 4".
ACCRETECH / TSK UF 200SA is a prober that is used in the semiconductor industry. It is a fully automated prober, which is used to measure and test semiconductor wafers, chips, and ICs. This prober is suitable for high-volume manufacturers as well as quality testing departments. TSK UF200SA is a 4-axis prober. It has XYZ axis control, which allows it to accurately move and position components in any direction, as well as performing automated accurately the measurements. This prober also includes a platen piece, which is used when positioning and moving objects on the z-axis. ACCRETECH UF 200 SA is equipped with a probe head. This head consists of a piezoelectric actuator, which is used for contact engagement and disengagement, as well as contact force measurement. The head also incorporates a rotational device, which is used to quickly align the prober's probe tips to be in line with the component's contact pins. The interface of TSK UF 200SA is designed for easy operation. The user can control the prober settings, data collection, and other functions, directly from the interface. The interface is also equipped with an autocorrect system, which adjusts itself to the component's position when performing a measurement. UF 200SA is considered one of the most reliable, accurate and efficient probers on the market. It is capable of providing precise and consistent measurements, while minimizing the time between steps. It offers a range of features and functions that make it an ideal choice for most semiconductor applications. Its flexibility, accuracy, and speed make it an ideal tool for both high-volume production and quality control demands. In short, UF 200 SA is a 4-axis prober that is designed for automated testing, probing and measurement of semiconductor components. It is equipped with a probe head that can accurately engage and disengage contact pins, and a platen piece that can precisely position and move objects on the z-axis. The user can easily control the settings from the interface, and the autocorrect system automatically adjusts to the component's position when performing a measurement. ACCRETECH UF200SA offers a range of features and functions that make it an ideal choice for most semiconductor applications.
There are no reviews yet