Used WENTWORTH 0-037-1106 #14370 for sale

WENTWORTH 0-037-1106 is an prober designed for use in communications applications, such as network testing and fault finding. It is used to measure signal strength and determine the cause of data loss and various signal disturbance problems. The prober consists of a spring-loaded probe head with a sharp point, mounted on top of a non-conductive handle. The handle has a strain relief hook to prevent cable stressing and two permanent magnets which are used to contain the magnetized probe head when not in use. The probe head is made of high-quality stainless steel and is equipped with an angular guard to reduce the likelihood of deflecting signals and a tip cap for added protection. The probe has a high-tensile point, capable of penetrating up to 5.5mm diameter holes in printed circuit boards. When a signal is detected by the prober, its waveform pattern is displayed on the handle's LCD screen. 0-037-1106 is equipped with an adjustable sensitivity control, which allows users to accurately detect signals at low and high levels. The signal is amplified for a higher signal-to-noise ratio and improved signal accuracy. The signal indicators are displayed in three pressure settings, allowing users to monitor signal performance over the probe's range. The handle also has a signal wire check function, which can detect any short, open or impedance mismatch. The signal check is useful for troubleshooting and maintenance of communications circuits, such as DSL and cable modems. WENTWORTH 0-037-1106 is ideal for testing coaxial cables and other digital transmission lines. 0-037-1106 is designed to be easy to operate and requires minimal user effort. It is powered by two AAA alkaline batteries and comes with an ergonomic handle and a rugged housing for protection. The high-quality construction ensures reliable performance and a long product life. The prober is suitable for any environment and is compliant with all relevant safety regulations.